Product Finder
INEOS products make a significant contribution to saving life, improving health and enhancing standards of living for people around the world. Our businesses produce the raw materials that are essential in the manufacture of a wide variety of goods, ranging from automotive parts to medical applications, mobile phones to construction.
Showing 8 Results
INEOS Oligomers
-
MaterialGAS/SPEC Gas Treating AminesBrandBusinessINEOS OligomersGrades
PRODUCT
GRADECARBON
CHAINMOL.
WEIGHT
(Mn)KINEMATIC
VISCOSITYTECH
DATA
SHEETSALES SPECS SDS CONTACT APPLICATIONS GAS/SPEC CS-1 CONTACT > GAS/SPEC CS-1 specialty amine is a formulated MDEA (methyldiethanolamine) solvent designed for removal of H2S and CO2 from gas or liquid hydrocarbon streams. GAS/SPEC CS-1 is typically used in applications where low levels of CO2 are required in the treated gas. GAS/SPEC CS-1 provides greater gas removal capacity per volume of circulating solution than generic amines such as monoethanolamine (MEA) or diethanolamine (DEA). GAS/SPEC CS-1 is less corrosive than generic amines and can be used at up to 50 weight % amine strength, which reduces amine circulation rate and energy usage. This translates into lower operating costs and increased capacity for existing equipment and reduced capital for new equipment. Treament of natural gas, LPG, and ethane are typical applications. GAS/SPEC CS-1000 CONTACT > GAS/SPEC CS-1000 is a methyldiethanolamine (MDEA) based solvent formulated to provide deep removal of carbon dioxide (CO2) from gas processing applications. GAS/SPEC CS-1000 allows for greater CO2 removal capacity with superior chemical stability, lower corrosion and longer product life under extreme conditions than MEA (monoethanolamine) or DEA (diethanolamine). GAS/SPEC CS-1000 solvent should be considered mainly for applications in which the treated gas CO2 specification is less than 1000 ppmv. GAS/SPEC CS-1000 can be used to replace MDEA-piperazine blends in all applications. Typical ones include ammonia, hydrogen plants and ethane treating. GAS/SPEC CS-2000 CONTACT > GAS/SPEC CS-2000 Series Specialty Amines are a methyldiethanolamine (MDEA) based solvent formulated to provide deep removal of carbon dioxide (CO2) from gas streams. GAS/SPEC CS-2000 provides enhanced formulation stability over previous product alternatives in the market. By eliminating the preferential component loss that leads up to a buildup of impurities, it retains maximum CO2 removal capacity with lower energy requirements, lower corrosion, and longer product life even under extreme conditions. This translates into lower operating costs and less maintenance. GAS/SPEC CS-3 CONTACT > GAS/SPEC CS-3 Specialty Amine is specifically designed for near complete removal of H2S and moderate removal of CO2 from gas or liquid streams. This solvent is ideal for gas treating applications where some CO2 in the treated gas is desired. By allowing a portion of the CO2 to remain, GAS/SPEC CS-3 can increase the treating capacity or reduce the energy costs of the amine system with significantly less corrosion than diethanolamine (DEA) or monoethanolamine (MEA). GAS/SPEC CSPLUS CONTACT > GAS/SPEC CS-Plus Specialty Amine is specifically designed for maximum CO2 removal. Since it’s introduction in 1988, GAS/SPEC has proven to be one of the most cost effective solvent for CO2 removal in ammonia, hydrogen, and other gas processing plants. This solvent has allowed gas processors to increase gas throughput or reduce energy costs in existing facilities. GAS/SPEC SS CONTACT > GAS/SPEC SS Specialty Amine is an INEOS formulated MDEA (methyldiethanolamine) specifically designed for the gas treating industry. It selectively removes H2S over CO2 from a gas or liquid stream, which results in greater acid gas removal capacity per volume of circulating solution than amines such as monoethanolamine (MEA), diethanolamine (DEA), and diisopropanolamine (DIPA). GAS/SPEC SS is less corrosive and less prone to degradation than MEA, DEA, or DIPA and it can be used at up to 50 weight % amine strength, which reduces amine circulation rate and energy usage. This translates into lower operating costs and increased capacity for existing equipment and reduced capital for new equipment. Applications include coal gasification and tail gas treating. GAS/SPEC SS-3 CONTACT > GAS/SPEC SS-3 Specialty Amine is formulated for use in applications where selective removal of H2S from gas streams is required. GAS/SPEC SS-3 not only removes H2S to lower levels than MDEA (methyldiethanolamine) alone, but also improves CO2 slip. Increased selectivity for H2S over CO2 allows the plant to increase treating capacity, lower energy usage, and improve the quality of acid gas going to the sulfur plant. GAS/SPEC TG-10 CONTACT > GAS/SPEC TG-10 Specialty Amine is specifically designed for meeting a 10 ppmv H2S specification in tail gas treating applications. GAS/SPEC TG-10 is ideal for meeting stringent regulatory requirements and reducing the final SO2 effluent associated with tail gas treaters. GAS/SPEC TG-10 can allow you to realize near 99.9% sulfur conversion. This product can help meet the lower specifications without the penalty of increased CO2 pickup so there is no reduction in sulfur plant capacity.