Product Finder
INEOS products make a significant contribution to saving life, improving health and enhancing standards of living for people around the world. Our businesses produce the raw materials that are essential in the manufacture of a wide variety of goods, ranging from automotive parts to medical applications, mobile phones to construction.
Showing 591 Results
INEOS Nitriles
-
MaterialAcrylonitrileBrandBusinessINEOS NitrilesGrades
PRODUCT SALES SPECS SDS CONTACT APPLICATIONS Acrylonitrile - Export SSS SDS CONTACT > INEOS leads the way in acrylonitrile through industry advocacy, safety training seminars and development of tools to insure this product is properly handled by all who use it. Acrylonitrile-based acrylic fibres, a popular substitute for cotton and wool, are used to make clothing, carpeting and blankets. Rugged and durable, ABS plastic derived from Acrylonitrile is chosen for its toughness and dimensional stability over other engineering resins. Other applications for Acrylonitrile include Nitrile rubber for hoses and gaskets. Acrylonitrile - US SSS SDS CONTACT > INEOS leads the way in acrylonitrile through industry advocacy, safety training seminars and development of tools to insure this product is properly handled by all who use it. Acrylonitrile-based acrylic fibres, a popular substitute for cotton and wool, are used to make clothing, carpeting and blankets. Rugged and durable, ABS plastic derived from Acrylonitrile is chosen for its toughness and dimensional stability over other engineering resins. Other applications for Acrylonitrile include Nitrile rubber for hoses and gaskets. Acrylonitrile (HP) - Europe SSS SDS CONTACT > INEOS leads the way in acrylonitrile through industry advocacy, safety training seminars and development of tools to insure this product is properly handled by all who use it. Acrylonitrile-based acrylic fibres, a popular substitute for cotton and wool, are used to make clothing, carpeting and blankets. Rugged and durable, ABS plastic derived from Acrylonitrile is chosen for its toughness and dimensional stability over other engineering resins. Other applications for Acrylonitrile include Nitrile rubber for hoses and gaskets. Acrylonitrile (MHQ) - Europe SSS SDS CONTACT > INEOS leads the way in acrylonitrile through industry advocacy, safety training seminars and development of tools to insure this product is properly handled by all who use it. Acrylonitrile-based acrylic fibres, a popular substitute for cotton and wool, are used to make clothing, carpeting and blankets. Rugged and durable, ABS plastic derived from Acrylonitrile is chosen for its toughness and dimensional stability over other engineering resins. Other applications for Acrylonitrile include Nitrile rubber for hoses and gaskets.
INEOS O & P Europe
-
MaterialCompoundBrandEltex PBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS HEY500-NP 25
(230°C/2.16 kg)910 TDS SSS QUICK SDS > REACH > CONTACT > LDPE compound for extrusion and co-extrusion coating applications in which high speeds with various substrates are involved. -
MaterialEBABrandBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS B26E730 0.60
(190°C/2.16 kg)925 TDS SSS QUICK SDS > REACH > CONTACT > B26E730 has been developed to give a very strong and tough film with excellent cold and outdoor properties for applications such as Stretch hoods, construction film, heavy-duty bags. -
MaterialEMAABrandBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS M29N430 8.0
(190°C/2.16 kg)934 TDS QUICK SDS > REACH > CONTACT > M29N430 is a specialty extrusion coating resin with improved adhesion characteristics. Main application fields include aluminium foil and metallized film coating both for industrial use, food and flexible packaging. M32P430 10
(190°C/2.16 kg)937 TDS QUICK SDS > REACH > CONTACT > M32P430 is a specialty extrusion coating resin with improved adhesion characteristics. Main application fields include aluminium foil and metallized film coating both for industrial use, food and flexible packaging. -
MaterialHDPEBrandRigidexBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS HD3575UA 7.5
(190°C/2.16 kg)935 TDS SSS QUICK SDS > REACH > CONTACT > Linear medium density polyethylene grade, supplied in pellet form for use in rotational moulding. HD5060UA 5.5
(190°C/2.16 kg)950 TDS SSS QUICK SDS > REACH > CONTACT > Rigidex® HD5060UA is a linear copolymer polyethylene grade supplied in pellet form for injection moulding application. HD5231EA 31
(190°C/2.16 kg)953 TDS SSS QUICK SDS > REACH > CONTACT > RIGIDEX® HD5231EA is a high density polyethylene copolymer with a narrow molecular weight distribution, suitable for thin wall injection moulding and fast cycling applications HD5802BM 0.3
(190°C/2.16 kg)958 TDS SSS QUICK SDS > REACH > CONTACT > Rigidex® HD5802BM is ideal for use in a wide range of blow moulding applications. The grade is particularly well suited to chemical and detergent packaging as the exceptional ESCR can allow for significant bottle weight reduction. HD5802BM-R 0.3
(190°C/2.16 kg)956.5 TDS SSS QUICK SDS > REACH > CONTACT > RIGIDEX® HD5802BM-R is ideal for use in a wide range of blow moulding applications. The grade is particularly well suited to chemical and detergent packaging as the exceptional ESCR can allow for significant bottle weight reduction. HD6012EA 12
(190°C/2.16 kg)960 TDS SSS QUICK SDS > REACH > CONTACT > RIGIDEX® HD6012EA is a high-density polyethylene with a narrow molecular weight distribution, suitable for a wide range of injection and compression moulding applications. HM5510BM 9.5
(190°C/21.6 kg)954 1250 TDS SSS QUICK SDS > REACH > CONTACT > RIGIDEX® HM5510BM is a bimodal high molecular weight grade supplied in pellet form for medium and large blow moulding applications with enhanced stress-crack resistance and stiffness. -
MaterialHDPEBrandEltexBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS HD3850UA 4.5
(190°C/2.16 kg)938 TDS SSS QUICK SDS > REACH > CONTACT > Rotomoulding application; water tanks, chemical tanks, agricultural, play ground, recycling banks. HD3930UA 3.0
(190°C/2.16 kg)939 TDS SSS QUICK SDS > REACH > CONTACT > Rotomoulding application; various tank applications. HD4330UA 3.0
(190°C/2.16 kg)943 TDS SSS QUICK SDS > REACH > CONTACT > Rotomoulding applications ; fuel tanks, kayak, manhole inspection draining tank, underground parts. HD5502M 0.2
(190°C/2.16 kg)954 1050 TDS SSS QUICK SDS > REACH > CONTACT > ELTEX® HD5502M is a medium molecular weight copolymer grade designed for use in a wide range of blow moulding and extrusion applications including bottles. It is suitable for applications in the medical or pharmaceutical sectors. -
MaterialHDPEBrandBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS HD3575UA 7.5
(190°C/2.16 kg)935 TDS SSS QUICK SDS > REACH > CONTACT > Linear medium density polyethylene grade, supplied in pellet form for use in rotational moulding. HD3850UA 4.5
(190°C/2.16 kg)938 TDS SSS QUICK SDS > REACH > CONTACT > Rotomoulding application; water tanks, chemical tanks, agricultural, play ground, recycling banks. HD3855UA 5.0
(190°C/2.16 kg)938 TDS SSS QUICK SDS > REACH > CONTACT > Linear medium density polyethylene grade, supplied in pellet form for use in rotational moulding. HD3930UA 3.0
(190°C/2.16 kg)939 TDS SSS QUICK SDS > REACH > CONTACT > Rotomoulding application; various tank applications. HD4330UA 3.0
(190°C/2.16 kg)943 TDS SSS QUICK SDS > REACH > CONTACT > Rotomoulding applications ; fuel tanks, kayak, manhole inspection draining tank, underground parts. HD5060UA 5.5
(190°C/2.16 kg)950 TDS SSS QUICK SDS > REACH > CONTACT > Rigidex® HD5060UA is a linear copolymer polyethylene grade supplied in pellet form for injection moulding application. HD5226EA-M 26
(190°C/2.16 kg)953 TDS QUICK SDS > REACH > CONTACT > HDPE copolymer especially recommended for manufacturing syringe components by injection moulding. It can also be used for manufacturing thin-walled containers and caps & closures intended for the primary packaging of medical and pharmaceutical applications. HD5231EA 31
(190°C/2.16 kg)953 TDS SSS QUICK SDS > REACH > CONTACT > RIGIDEX® HD5231EA is a high density polyethylene copolymer with a narrow molecular weight distribution, suitable for thin wall injection moulding and fast cycling applications HD5502M 0.2
(190°C/2.16 kg)954 1050 TDS SSS QUICK SDS > REACH > CONTACT > ELTEX® HD5502M is a medium molecular weight copolymer grade designed for use in a wide range of blow moulding and extrusion applications including bottles. It is suitable for applications in the medical or pharmaceutical sectors. HD5802BM 0.3
(190°C/2.16 kg)958 TDS SSS QUICK SDS > REACH > CONTACT > Rigidex® HD5802BM is ideal for use in a wide range of blow moulding applications. The grade is particularly well suited to chemical and detergent packaging as the exceptional ESCR can allow for significant bottle weight reduction. HD5802BM-R 0.3
(190°C/2.16 kg)956.5 TDS SSS QUICK SDS > REACH > CONTACT > RIGIDEX® HD5802BM-R is ideal for use in a wide range of blow moulding applications. The grade is particularly well suited to chemical and detergent packaging as the exceptional ESCR can allow for significant bottle weight reduction. HD6012EA 12
(190°C/2.16 kg)960 TDS SSS QUICK SDS > REACH > CONTACT > RIGIDEX® HD6012EA is a high-density polyethylene with a narrow molecular weight distribution, suitable for a wide range of injection and compression moulding applications. HM5510BM 9.5
(190°C/21.6 kg)954 1250 TDS SSS QUICK SDS > REACH > CONTACT > RIGIDEX® HM5510BM is a bimodal high molecular weight grade supplied in pellet form for medium and large blow moulding applications with enhanced stress-crack resistance and stiffness. -
MaterialHDPEBrandEltex MEDBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS HD5226EA-M 26
(190°C/2.16 kg)953 TDS QUICK SDS > REACH > CONTACT > HDPE copolymer especially recommended for manufacturing syringe components by injection moulding. It can also be used for manufacturing thin-walled containers and caps & closures intended for the primary packaging of medical and pharmaceutical applications. -
MaterialHEAT SEALBrandEltex PBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS KS350 5
(230°C/2.16 kg)620 TDS QUICK SDS > REACH > CONTACT > BOPP Film 105°C SIT terpolymer with slip and anti-blocking. KS350 HP 6
(230°C/2.16 kg)620 TDS QUICK SDS > REACH > CONTACT > ELTEX® P KS350 HP offers a very low heat sealing temperature and contains anti-block and slip additives. Its fine-tuned rheology offers excellent processability on high speed BOPP conversion lines. KS351 7.3
(230°C/2.16 kg)620 TDS QUICK SDS > REACH > CONTACT > BOPP Film 105°C SIT terpolymer with slip and anti-blocking. KS357 5
(230°C/2.16 kg)620 TDS QUICK SDS > REACH > CONTACT > BOPP Film 105°C SIT terpolymer for metallisable film. KS357 HP 6
(230°C/2.16 kg)620 TDS QUICK SDS > REACH > CONTACT > ELTEX® P KS357 HP offers a very low heat sealing temperature and contains no technical additives. Its fine-tuned rheology offers excellent processability on high speed BOPP conversion lines. KS359 5
(230°C/2.16 kg)620 TDS QUICK SDS > REACH > CONTACT > BOPP Film 105°C SIT terpolymer without technical additives. KS359 HP 6
(230°C/2.16 kg)620 TDS QUICK SDS > REACH > CONTACT > ELTEX® P KS359 HP offers a very low heat sealing temperature and contains no technical additives. Its fine-tuned rheology offers excellent processability on high speed BOPP conversion lines. KS383 HP 6
(230°C/2.16 kg)620 TDS QUICK SDS > REACH > CONTACT > BOPP Film 105°C SIT terpolymer with anti-blocking, recommended for high speed BOPP lines. KS384 5
(230°C/2.16 kg)620 TDS QUICK SDS > REACH > CONTACT > BOPP Film 105°C SIT terpolymer with anti-blocking. KS385 5
(230°C/2.16 kg)620 TDS QUICK SDS > REACH > CONTACT > BOPP Film 105°C SIT terpolymer with anti-blocking. KS399 5
(230°C/2.16 kg)500 TDS QUICK SDS > REACH > CONTACT > BOPP Film 90°C SIT butene copolymer without technical additives. KS400 5
(230°C/2.16 kg)700 TDS QUICK SDS > REACH > CONTACT > BOPP Film 115°C SIT high C2 copolymer with slip and anti-blocking. KS407 5
(230°C/2.16 kg)700 TDS QUICK SDS > REACH > CONTACT > BOPP Film 115°C SIT high C2 copolymer for metallisable film. KS407HP 5
(230°C/2.16 kg)720 TDS QUICK SDS > REACH > CONTACT > Modified random copolymer with a high ethylene content, developed for use primarily as the sealing layer in "coextruded bioriented metallisable film". KS409 5
(230°C/2.16 kg)700 TDS QUICK SDS > REACH > CONTACT > BOPP Film 115°C SIT high C2 copolymer without technical additives. KS414 7.3
(230°C/2.16 kg)750 TDS QUICK SDS > REACH > CONTACT > BOPP Film 115°C SIT high C2 copolymer with slip and anti-blocking - narrow MWD. KS607 5
(230°C/2.16 kg)850 TDS QUICK SDS > REACH > CONTACT > BOPP film butene copolymer for high barrier metallisable film. KS689 5
(230°C/2.16 kg)350 TDS QUICK SDS > REACH > CONTACT > Propylene/alpha-olefin copolymer specially developed for the sealing layers of “coextruded bi-oriented film” for food and technical packaging. KV327 8
(230°C/2.16 kg)900 TDS QUICK SDS > REACH > CONTACT > ELTEX® P KV327 is a terpolymer with a medium content of comonomers and contains no special additives. Its stabilization package has been especially designed for metallisable film applications. KV353 9
(230°C/2.16 kg)650 TDS QUICK SDS > REACH > CONTACT > ELTEX® P KV353 is a terpolymer specially developed for the sealing layers of blown multilayer BOPP film for food and technical packaging. It contains anti-blocking additive only. KV357 9
(230°C/2.16 kg)650 TDS SSS QUICK SDS > REACH > CONTACT > ELTEX® P KV357 is a terpolymer specially developed for the sealing layers of blown multilayer BOPP film for food and technical packaging. It doesn’t contain any technical additive. KV389 9
(230°C/2.16 kg)500 TDS QUICK SDS > REACH > CONTACT > ELTEX® P KV389 is a terpolymer specially developed for the sealing layers of blown multilayer BOPP film for low sealing performance and lamination. ELTEX® P KV389 is specially designed for the so-called “double bubble process”. It contains no technical additives. -
MaterialHPPBrandBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS 100-AA12 12
(230°C/2.16 kg)1450 TDS SSS QUICK SDS > REACH > CONTACT > Injection moulding applications of boxes, closures and household articles. 100-CA25 25
(230°C/2.16 kg)1600 TDS SSS QUICK SDS > REACH > CONTACT > Consumer products, transparent containers, syringes. 100-CA40 42
(230°C/2.16 kg)1500 TDS SSS QUICK SDS > REACH > CONTACT > Is intended for high speed injection moulding of household articles, lightweight dairy tubs and goblets and ice cream boxes. 100-CA50 50
(230°C/2.16 kg)1550 TDS SSS QUICK SDS > REACH > CONTACT > Thin walled containers for dairy and fresh food, media packaging. 100-CA50S 50
(230°C/2.16 kg)1550 TDS SSS QUICK SDS > REACH > CONTACT > Thin walled containers for dairy and fresh food, media packaging. 100-CB25 25
(230°C/2.16 kg)1500 TDS SSS QUICK SDS > REACH > CONTACT > Media packaging, technical moulding, fast cycling. 100-CC60 60
(230°C/2.16 kg)TDS SSS QUICK SDS > REACH > CONTACT > 100-CC60 is a high fluidity clarified homopolymer with antistatic properties designed for injection moulding. The grade has been designed with a very high rigidity and excellent clarity even when processing the material at low temperatures. 100-GA01 0.9
(230°C/2.16 kg)1550 TDS SSS QUICK SDS > REACH > CONTACT > Sheets, blow moulding, strapping. Good rigidity, high heat resistance. 100-GA02 2
(230°C/2.16 kg)1450 TDS SSS QUICK SDS > REACH > CONTACT > HPP for trays, containers; good rigidity, high heat resistance,food containers, technical mouldings, strapping, tapes, ropes. 100-GA03 3
(230°C/2.16 kg)1450 TDS SSS QUICK SDS > REACH > CONTACT > Trays and containers for food products, tapes. Good rigidity, high heat resistance. 100-GA03S 3
(230°C/2.16 kg)1450 TDS SSS QUICK SDS > REACH > CONTACT > Trays and containers for food products, tapes. Good rigidity, high heat resistance. 100-GA04 4
(230°C/2.16 kg)1400 TDS SSS QUICK SDS > REACH > CONTACT > Trays and containers for food products, tapes. Good rigidity, high heat resistance. 100-GA09 9
(230°C/2.16 kg)1500 TDS SSS QUICK SDS > REACH > CONTACT > General purpose injection moulding, standard cast film. 100-GA12 12
(230°C/2.16 kg)1400 TDS SSS QUICK SDS > REACH > CONTACT > Homopolymer for standard cast film, general purpose injection moulding, Caps & Closures Non Organo. 100-GA12S 12
(230°C/2.16 kg)1400 TDS SSS QUICK SDS > REACH > CONTACT > Homopolymer for standard cast film, general purpose injection moulding, Caps & Closures Non Organo. 100-GA35 35
(230°C/2.16 kg)1350 TDS SSS QUICK SDS > REACH > CONTACT > Injection moulding master-batches & compounds applications. 100-GB06 6
(230°C/2.16 kg)1450 TDS SSS QUICK SDS > REACH > CONTACT > HPP for trays, caps & closures, containers. Good rigidity, high heat resistance. 100-GB25 25
(230°C/2.16 kg)1200 TDS SSS QUICK SDS > REACH > CONTACT > Thin wall parts, garden furniture. 100-GB25S 25
(230°C/2.16 kg)1200 TDS SSS QUICK SDS > REACH > CONTACT > 100-GB25S is intended for injection moulding applications. It is particularly recommended for high speed moulding in multi-cavity tooling. 100-GD02 2
(230°C/2.16 kg)1450 TDS SSS QUICK SDS > REACH > CONTACT > BOPP Film. Metallisation. 100-GD03 3
(230°C/2.16 kg)1450 TDS SSS QUICK SDS > REACH > CONTACT > BOPP Film. Metallisation. 100-HR25 25
(230°C/2.16 kg)1800 TDS SSS QUICK SDS > REACH > CONTACT > High stiffness for appliances, technical moulding and food packaging. 100-MG03 3
(230°C/2.16 kg)1450 TDS SSS QUICK SDS > REACH > CONTACT > PP homopolymer for inhaler components and primary rigid packaging of medical and pharmaceutical applications. 100-MG12 12
(230°C/2.16 kg)1400 TDS SSS QUICK SDS > REACH > CONTACT > PP homopolymer for caps & closures intended for the primary packaging of medical and pharmaceutical applications. 100-MG25 25
(230°C/2.16 kg)1200 TDS SSS QUICK SDS > REACH > CONTACT > PP homopolymer for syringe and metered-dose inhaler components, caps & closures, thin wall containers as well as tubes, intended for the primary packaging of medical and pharmaceutical applications. 100-NA00 0.3
(230°C/2.16 kg)1500 TDS SSS QUICK SDS > REACH > CONTACT > Sheets, blow moulding, strapping. Good rigidity, high heat resistance.1 100-NB03 3
(230°C/2.16 kg)1800 TDS SSS QUICK SDS > REACH > CONTACT > Transparent trays and containers for food products. High stiffness, very good optics. No anti-static agent. 100-NB03S 3
(230°C/2.16 kg)1800 TDS SSS QUICK SDS > REACH > CONTACT > Transparent trays and containers for food products. High stiffness, very good optics. No anti-static agent. 100-SB09 9
(230°C/2.16 kg)1300 TDS SSS QUICK SDS > REACH > CONTACT > It is recommended for food packaging, textile packaging, flowers packaging, lamination films and stationary supplies. 100-XA03 3
(230°C/2.16 kg)1450 TDS SSS QUICK SDS > REACH > CONTACT > 100-XA03 is a polypropylene homopolymer grade used for the production of high tenacity staple fibres. 100-XZ12 12
(230°C/2.16 kg)TDS SSS QUICK SDS > REACH > CONTACT > Long spin fine denier staple fibres for high speed nonwoven thermobonding lines. 101-CA06 6
(230°C/2.16 kg)1750 TDS SSS QUICK SDS > REACH > CONTACT > Trays and containers for food products. Good rigidity, high heat resistance, good transparency. 101-CC60 60
(230°C/2.16 kg)1800 TDS SSS QUICK SDS > REACH > CONTACT > Injection moulding of transparent packaging. 101-GA09 9
(230°C/2.16 kg)1350 TDS SSS QUICK SDS > REACH > CONTACT > Can be used as single layer films as well as in the core layer of coextruded films, for food packaging, hosiery packaging, shirt packaging, laminations films, … as well as for stationary supplies. 101-GB08 8
(230°C/2.16 kg)1450 TDS SSS QUICK SDS > REACH > CONTACT > BOPP Film. Double bubble process. 101-GF02 2
(230°C/2.16 kg)1400 TDS QUICK SDS > REACH > CONTACT > Coextruded biorented film using the tenter process. 101-SA09 9
(230°C/2.16 kg)1450 TDS SSS QUICK SDS > REACH > CONTACT > Homopolymer PP for standard cast film, general purpose injection moulding, Caps & Closures Non Organo. With slip agent. 101-XA12 12
(230°C/2.16 kg)TDS SSS QUICK SDS > REACH > CONTACT > Staple fibres for carpet face yarn, continuous filament for straps & belts. 101-XA25 25
(230°C/2.16 kg)TDS SSS QUICK SDS > REACH > CONTACT > Bulk Continuous Filament for carpet face yarn, Fine denier staple fibres. 101-ZB25 25
(230°C/2.16 kg)TDS SSS QUICK SDS > REACH > CONTACT > Industrial Spunbond Nonwovens. Suitable for high speed spinning processes. 102-CA03 3
(230°C/2.16 kg)1800 TDS SSS QUICK SDS > REACH > CONTACT > Transparent trays and containers for food products. High stiffness, very good optics and easy de-nesting. 102-CA03S 3
(230°C/2.16 kg)1800 TDS SSS QUICK SDS > REACH > CONTACT > Transparent trays and containers for food products. High stiffness, very good optics and easy de-nesting. 102-GD08 8
(230°C/2.16 kg)1450 TDS SSS QUICK SDS > REACH > CONTACT > BOPP Film. Double bubble process, metallisation. 102-GF02 2
(230°C/2.16 kg)1350 TDS SSS QUICK SDS > REACH > CONTACT > BOPP Film. Improved stretchability. 102-XA04 4
(230°C/2.16 kg)1400 TDS SSS QUICK SDS > REACH > CONTACT > 102-XA04 is a polypropylene homopolymer grade used for the production of high tenacity staple fibres. 102-XA06 6
(230°C/2.16 kg)TDS SSS QUICK SDS > REACH > CONTACT > High tenacity staple fibres for needlepunched nonwovens (geotextiles). 103-CA03S 3
(230°C/2.16 kg)1900 TDS SSS QUICK SDS > REACH > CONTACT > Sheet extrusion and thermoforming applications. 104-CA03 3
(230°C/2.16 kg)1700 TDS SSS QUICK SDS > REACH > CONTACT > Extrusion thermoforming, providing improved rigidity and impact resistance combined with a very high clarity, reduced cycle times and good antistatic properties. 150-GA02 2
(230°C/2.16 kg)1450 TDS SSS QUICK SDS > REACH > CONTACT > Trays and containers for food products, strapping, tapes, ropes. Good rigidity, high heat resistance. 150-GA03 3
(230°C/2.16 kg)1450 TDS SSS QUICK SDS > REACH > CONTACT > Thermoforming, tapes, carpet backing and geotextile. Good rigidity, high heat resistance. 150-ZA12 12
(230°C/2.16 kg)1250 TDS SSS QUICK SDS > REACH > CONTACT > Intended for the extrusion of fibres with the spunbond technology. It is also suitable for extrusion of continuous filaments (CF). 150-ZA25 25
(230°C/2.16 kg)1200 TDS SSS QUICK SDS > REACH > CONTACT > Is intended for the extrusion of fine fibres with the spunbond technology, also suitable for injection molding applications. 151-GA02 2
(230°C/2.16 kg)1300 TDS SSS QUICK SDS > REACH > CONTACT > Homopolymer polypropylene intended for sheets extrusion applications requiring a good melt strength and a good processability. 180-HR25 25
(230°C/2.16 kg)1800 TDS SSS QUICK SDS > REACH > CONTACT > Homopolymer with high stiffness for appliances, technical moulding and food packaging, manufactured with a non phthalate based catalyst. 194-NA25 25
(230°C/2.16 kg)1750 TDS SSS QUICK SDS > REACH > CONTACT > Transparent containers. HCS586 7
(230°C/2.16 kg)2200 TDS SSS QUICK SDS > REACH > CONTACT > Nucleated polypropylene homopolymer designed for cast film applications requiring: remarkably high stiffness, good optical properties, outstanding temperature resistance. HCW280 20
(230°C/2.16 kg)2200 TDS SSS QUICK SDS > REACH > CONTACT > Ultra high stiffness for appliances, technical moulding and food packaging. rPP1002 2.5
(230°C/2.16 kg)1500 TDS SSS QUICK SDS > REACH > CONTACT > Extrusion and Blow-moulding applications, non-food rPP1003 4.0
(230°C/2.16 kg)1550 TDS QUICK SDS > REACH > CONTACT > BOPP (double bubble process), non-food rPP1013 13
(230°C/2.16 kg)1550 TDS QUICK SDS > REACH > CONTACT > Injection-moulding of technical parts, non-food caps, closures and trays rPP1015GY1 15
(230°C/2.16 kg)1550 TDS QUICK SDS > REACH > CONTACT > Injection-moulding of technical parts, non-food caps, closures and trays rPP1025 25
(230°C/2.16 kg)1900 TDS QUICK SDS > REACH > CONTACT > Injection-moulding of technical parts, non-food caps, closures and trays -
MaterialHPPBrandEltexBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS 100-CA50 50
(230°C/2.16 kg)1550 TDS SSS QUICK SDS > REACH > CONTACT > Thin walled containers for dairy and fresh food, media packaging. 100-CA50S 50
(230°C/2.16 kg)1550 TDS SSS QUICK SDS > REACH > CONTACT > Thin walled containers for dairy and fresh food, media packaging. -
MaterialHPPBrandEltex MEDBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS 100-MG03 3
(230°C/2.16 kg)1450 TDS SSS QUICK SDS > REACH > CONTACT > PP homopolymer for inhaler components and primary rigid packaging of medical and pharmaceutical applications. 100-MG12 12
(230°C/2.16 kg)1400 TDS SSS QUICK SDS > REACH > CONTACT > PP homopolymer for caps & closures intended for the primary packaging of medical and pharmaceutical applications. 100-MG25 25
(230°C/2.16 kg)1200 TDS SSS QUICK SDS > REACH > CONTACT > PP homopolymer for syringe and metered-dose inhaler components, caps & closures, thin wall containers as well as tubes, intended for the primary packaging of medical and pharmaceutical applications. -
MaterialHPPBrandEltex PBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS HCS586 7
(230°C/2.16 kg)2200 TDS SSS QUICK SDS > REACH > CONTACT > Nucleated polypropylene homopolymer designed for cast film applications requiring: remarkably high stiffness, good optical properties, outstanding temperature resistance. HCW280 20
(230°C/2.16 kg)2200 TDS SSS QUICK SDS > REACH > CONTACT > Ultra high stiffness for appliances, technical moulding and food packaging. -
MaterialHPPBrandRecycl-INBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS rPP1002 2.5
(230°C/2.16 kg)1500 TDS SSS QUICK SDS > REACH > CONTACT > Extrusion and Blow-moulding applications, non-food rPP1003 4.0
(230°C/2.16 kg)1550 TDS QUICK SDS > REACH > CONTACT > BOPP (double bubble process), non-food rPP1013 13
(230°C/2.16 kg)1550 TDS QUICK SDS > REACH > CONTACT > Injection-moulding of technical parts, non-food caps, closures and trays rPP1015GY1 15
(230°C/2.16 kg)1550 TDS QUICK SDS > REACH > CONTACT > Injection-moulding of technical parts, non-food caps, closures and trays rPP1025 25
(230°C/2.16 kg)1900 TDS QUICK SDS > REACH > CONTACT > Injection-moulding of technical parts, non-food caps, closures and trays -
MaterialHPP PowderBrandEltex PBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS HL001PF 2.15
(230°C/2.16 kg)1600 TDS SSS QUICK SDS > REACH > CONTACT > HV001PF 10
(230°C/2.16 kg)1600 TDS SSS QUICK SDS > REACH > CONTACT > HW001P 25
(230°C/2.16 kg)1650 TDS SSS QUICK SDS > REACH > CONTACT > Master batches. Compounds for fibres. HY001P 45
(230°C/2.16 kg)1700 TDS SSS QUICK SDS > REACH > CONTACT > -
MaterialICPBrandBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS 300-CA06 6
(230°C/2.16 kg)1500 TDS SSS QUICK SDS > REACH > CONTACT > Toys, housewares, pails, appliances. 350-HM00 0.3
(230°C/2.16 kg)1850 TDS SSS QUICK SDS > REACH > CONTACT > Impact copolymer for non-pressure pipes, blow-moulding and sheet extrusion applications. 350-HP45 45
(230°C/2.16 kg)1500 TDS SSS QUICK SDS > REACH > CONTACT > High flow, high rigidity, nucleated and antistatic impact copolymer specifically designed for fast cycling, thin walled injection moulding applications. 380-H100 90
(230°C/2.16 kg)1550 TDS SSS QUICK SDS > REACH > CONTACT > RIGIDEX® P 380-H100 is a nucleated and antistatic high flow impact copolymer specifically designed for very fast cycling, thin walled injection moulding applications. (Thin Walled Technical Mouldings, Yellow fat containers, Housewares) 381-H100 90
(230°C/2.16 kg)1350 TDS SSS QUICK SDS > REACH > CONTACT > RIGIDEX® P 380-H100 is a nucleated and antistatic high flow impact copolymer specifically designed for very fast cycling, thin walled injection moulding applications. (Thin Walled Technical Mouldings, Yellow fat containers, Housewares) 400-CA25 25
(230°C/2.16 kg)1550 TDS SSS QUICK SDS > REACH > CONTACT > Crates & boxes, pails, containers, housewares, toys. 400-CB08 8
(230°C/2.16 kg)1200 TDS SSS QUICK SDS > REACH > CONTACT > Crates, trays and large pails, batteries. 400-GA03 2.5
(230°C/2.16 kg)1250 TDS SSS QUICK SDS > REACH > CONTACT > Impact copolymer for sheets, trays, containers, artificial grass, stationery/confectionery films. Good heat resistance, very high impact. 400-GA05 5
(230°C/2.16 kg)1200 TDS SSS QUICK SDS > REACH > CONTACT > Impact copolymer for stationery/confectionery films, sheets, trays, containers. Good heat resistance, very high impact. 400-IM01 0.8
(230°C/2.16 kg)1650 TDS SSS QUICK SDS > REACH > CONTACT > Injection moulding (fittings, manholes), non-pressure pipes. 400-NA01 1.5
(230°C/2.16 kg)1300 TDS SSS QUICK SDS > REACH > CONTACT > Synthetic cardboards, Sheets, trays, containers; good heat resistance, very high impact. 401-CB50 50
(230°C/2.16 kg)1300 TDS SSS QUICK SDS > REACH > CONTACT > ICP for toys, punnets and trays, yellow fat containers, ice cream containers, housewares. 401-NA01 1.2
(230°C/2.16 kg)1300 TDS SSS QUICK SDS > REACH > CONTACT > Synthetic cardboards, Sheets, trays, containers; good heat resistance, very high impact. 401-NA06 6
(230°C/2.16 kg)1200 TDS SSS QUICK SDS > REACH > CONTACT > Impact copolymer nucleated for stationery films, sheets, trays, containers. Good heat resistance, very high impact. 402-CB12 12
(230°C/2.16 kg)1350 TDS SSS QUICK SDS > REACH > CONTACT > ICP for pails, containers, crates, housewares, toys. 433-NA00 0.3
(230°C/2.16 kg)1500 TDS SSS QUICK SDS > REACH > CONTACT > Sheets; non-pressure pipes; good heat resistance, very high impact. 450-HP60 60
(230°C/2.16 kg)1400 TDS SSS QUICK SDS > REACH > CONTACT > 451-HP40 40
(230°C/2.16 kg)1350 TDS SSS QUICK SDS > REACH > CONTACT > ICP for housewares, pails, boxes. 480-HP90 90
(230°C/2.16 kg)1350 TDS SSS QUICK SDS > REACH > CONTACT > Nucleated and antistatic high flow high impact copolymer manufactured with a non phthalate based catalystdesigned for very fast cycling, thin walled injection moulding applications. 500-GA20 20
(230°C/2.16 kg)1000 TDS SSS QUICK SDS > REACH > CONTACT > Toys, containers, car batteries, luggage - ultra high impact, improved stiffness. 500-NA01 1.5
(230°C/2.16 kg)1300 TDS SSS QUICK SDS > REACH > CONTACT > 540-NA08 8
(230°C/2.16 kg)1100 TDS SSS QUICK SDS > REACH > CONTACT > 540-NA08 is a very high impact copolymer recommended for injection moulding as well as for the production of compounds. 540-NA13 13
(230°C/2.16 kg)1150 TDS SSS QUICK SDS > REACH > CONTACT > 540-NA13 is a very high impact copolymer recommended for injection moulding of luggage, crates & boxes as well as for the production of compounds. 540-NA20 20
(230°C/2.16 kg)1000 TDS SSS QUICK SDS > REACH > CONTACT > 540-NA20 is a very high impact copolymer recommended for injection moulding as well as for the production of compounds. 540-NA25 25
(230°C/2.16 kg)1000 TDS SSS QUICK SDS > REACH > CONTACT > 540-NA25 is a very high impact copolymer recommended for injection moulding as well as for the production of compounds. 540-NA30 30
(230°C/2.16 kg)1000 TDS SSS QUICK SDS > REACH > CONTACT > 540-NA30 is a very high impact copolymer recommended for injection moulding as well as for the production of compounds. 540-NA60 60
(230°C/2.16 kg)1000 TDS SSS QUICK SDS > REACH > CONTACT > 540-NA60 is a very high impact copolymer, high flow recommended for injection moulding as well as for the production of compounds. CAP986S 6
(230°C/2.16 kg)1500 TDS SSS QUICK SDS > REACH > CONTACT > ICP for caps and closures for the packaging of carbonated soft drinks, manufactured with a non phthalate based catalyst. RF180 0.8
(230°C/2.16 kg)1300 TDS SSS QUICK SDS > REACH > CONTACT > Copolymer produced with a non-phthalate based catalyst with good heat resistance and very high impact. Used for synthetic cardboard, sheets, trays and containers for food products, stand-up pouches and films. rPP4013GY3 13
(230°C/2.16 kg)1500 TDS QUICK SDS > REACH > CONTACT > Crates & boxes, pails, containers, housewares. rPP4019 19
(230°C/2.16 kg)1450 TDS QUICK SDS > REACH > CONTACT > Crates & boxes, pails, containers, housewares. rPP4030GY3 30
(230°C/2.16 kg)1400 TDS QUICK SDS > REACH > CONTACT > Crates & boxes, pails, containers, housewares. rPP4050GY3 50
(230°C/2.16 kg)1400 TDS QUICK SDS > REACH > CONTACT > Crates & boxes, pails, containers, housewares. -
MaterialICPBrandEltex TUBBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS 350-HM00 0.3
(230°C/2.16 kg)1850 TDS SSS QUICK SDS > REACH > CONTACT > Impact copolymer for non-pressure pipes, blow-moulding and sheet extrusion applications. 433-NA00 0.3
(230°C/2.16 kg)1500 TDS SSS QUICK SDS > REACH > CONTACT > Sheets; non-pressure pipes; good heat resistance, very high impact. -
MaterialICPBrandRigidex PBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS 350-HP45 45
(230°C/2.16 kg)1500 TDS SSS QUICK SDS > REACH > CONTACT > High flow, high rigidity, nucleated and antistatic impact copolymer specifically designed for fast cycling, thin walled injection moulding applications. 380-H100 90
(230°C/2.16 kg)1550 TDS SSS QUICK SDS > REACH > CONTACT > RIGIDEX® P 380-H100 is a nucleated and antistatic high flow impact copolymer specifically designed for very fast cycling, thin walled injection moulding applications. (Thin Walled Technical Mouldings, Yellow fat containers, Housewares) 381-H100 90
(230°C/2.16 kg)1350 TDS SSS QUICK SDS > REACH > CONTACT > RIGIDEX® P 380-H100 is a nucleated and antistatic high flow impact copolymer specifically designed for very fast cycling, thin walled injection moulding applications. (Thin Walled Technical Mouldings, Yellow fat containers, Housewares) 450-HP60 60
(230°C/2.16 kg)1400 TDS SSS QUICK SDS > REACH > CONTACT > 451-HP40 40
(230°C/2.16 kg)1350 TDS SSS QUICK SDS > REACH > CONTACT > ICP for housewares, pails, boxes. 480-HP90 90
(230°C/2.16 kg)1350 TDS SSS QUICK SDS > REACH > CONTACT > Nucleated and antistatic high flow high impact copolymer manufactured with a non phthalate based catalystdesigned for very fast cycling, thin walled injection moulding applications. CAP986S 6
(230°C/2.16 kg)1500 TDS SSS QUICK SDS > REACH > CONTACT > ICP for caps and closures for the packaging of carbonated soft drinks, manufactured with a non phthalate based catalyst. -
MaterialICPBrandEltexBusinessINEOS O & P Europe
-
MaterialICPBrandEltex PBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS RF180 0.8
(230°C/2.16 kg)1300 TDS SSS QUICK SDS > REACH > CONTACT > Copolymer produced with a non-phthalate based catalyst with good heat resistance and very high impact. Used for synthetic cardboard, sheets, trays and containers for food products, stand-up pouches and films. -
MaterialICPBrandRecycl-INBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS rPP4013GY3 13
(230°C/2.16 kg)1500 TDS QUICK SDS > REACH > CONTACT > Crates & boxes, pails, containers, housewares. rPP4019 19
(230°C/2.16 kg)1450 TDS QUICK SDS > REACH > CONTACT > Crates & boxes, pails, containers, housewares. rPP4030GY3 30
(230°C/2.16 kg)1400 TDS QUICK SDS > REACH > CONTACT > Crates & boxes, pails, containers, housewares. rPP4050GY3 50
(230°C/2.16 kg)1400 TDS QUICK SDS > REACH > CONTACT > Crates & boxes, pails, containers, housewares. -
MaterialIonomerBrandEltexBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS I8H430Z 5.0
(190°C/2.16 kg)935 TDS QUICK SDS > REACH > CONTACT > ELTEX® I8H430Z is a Low Density Polyethylene ionomer for blown or cast film and extrusion coating applications. -
MaterialIonomerBrandBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS I8H430Z 5.0
(190°C/2.16 kg)935 TDS QUICK SDS > REACH > CONTACT > ELTEX® I8H430Z is a Low Density Polyethylene ionomer for blown or cast film and extrusion coating applications. M21E730 0.5
(190°C/2.16 kg)933 TDS SSS QUICK SDS > REACH > CONTACT > Easy-tear applications. -
MaterialLDPEBrandBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS 19N430 7.5
(190°C/2.16 kg)920 TDS SSS QUICK SDS > REACH > CONTACT > LDPE Grade for general coating applications with improved heat sealibity compared to 23L430, general purpose injection moulding. 19N430B 7.5
(190°C/2.16 kg)920 TDS SSS QUICK SDS > REACH > CONTACT > LDPE grade for general coating applications with improved heat sealability. 23L430 4.5
(190°C/2.16 kg)924 TDS SSS QUICK SDS > REACH > CONTACT > LDPE Grade for general coating applications, general purpose injection moulding. 23L430B 4.5
(190°C/2.16 kg)923 TDS SSS QUICK SDS > REACH > CONTACT > LDPE Grade for general coating applications, general purpose injection moulding. BPD2000E 2
(190°C/2.16 kg)923 TDS SSS QUICK SDS > REACH > CONTACT > Power medium & high voltage insulation and applications requesting extra cleanliness
, unstabilised very clean LDPE for peroxide crosslinking (direct peroxide injection).BPD2167 0.3
(190°C/2.16 kg)930 TDS SSS QUICK SDS > REACH > CONTACT > Power low voltage insulation
Unstabilised LDPE for overhead cables application (Monosil®).BPD8128 0.27
(190°C/2.16 kg)923 TDS SSS QUICK SDS > REACH > CONTACT > Power low voltage cable insulation
Stabilised LDPE for copper conductor (Monosil ®).PH19N630 7.5
(190°C/2.16 kg)920 TDS SSS QUICK SDS > REACH > CONTACT > Additive free LDPE grade for pharmaceutical applications such as coating and injection of tubes, caps and closures. PH22D630 0.3
(190°C/2.16 kg)922 TDS SSS QUICK SDS > REACH > CONTACT > Low density polyethylene for blow-fill-seal process (bottles & ampoules), films (bags & pouches) as well as flexible tubes, intended for the primary packaging of medical and pharmaceutical applications. PH23H630 2
(190°C/2.16 kg)923 TDS SSS QUICK SDS > REACH > CONTACT > Low Density Polyethylene for Blow-Fill-Seal process (bottles & ampoules) and films, intended for the primary packaging of medical and pharmaceutical applications. PH23T630 22
(190°C/2.16 kg)923 TDS SSS QUICK SDS > REACH > CONTACT > Low Density Polyethylene for injection moulding components (especially caps & closures) intended for the primary packaging of medical and pharmaceutical applications. PH27D630 0.3
(190°C/2.16 kg)927 TDS SSS QUICK SDS > REACH > CONTACT > Low Density Polyethylene for Blow-Fill-Seal process (bottles & ampoules), intended for the primary packaging of medical and pharmaceutical applications. PH30D630 0.3
(190°C/2.16 kg)930 TDS SSS QUICK SDS > REACH > CONTACT > Low Density Polyethylene for Blow-Fill-Seal process (bottles & ampoules), intended for primary packaging of medical and pharmaceutical applications. -
MaterialLDPEBrandEltex MEDBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS PH19N630 7.5
(190°C/2.16 kg)920 TDS SSS QUICK SDS > REACH > CONTACT > Additive free LDPE grade for pharmaceutical applications such as coating and injection of tubes, caps and closures. PH22D630 0.3
(190°C/2.16 kg)922 TDS SSS QUICK SDS > REACH > CONTACT > Low density polyethylene for blow-fill-seal process (bottles & ampoules), films (bags & pouches) as well as flexible tubes, intended for the primary packaging of medical and pharmaceutical applications. PH23H630 2
(190°C/2.16 kg)923 TDS SSS QUICK SDS > REACH > CONTACT > Low Density Polyethylene for Blow-Fill-Seal process (bottles & ampoules) and films, intended for the primary packaging of medical and pharmaceutical applications. PH23T630 22
(190°C/2.16 kg)923 TDS SSS QUICK SDS > REACH > CONTACT > Low Density Polyethylene for injection moulding components (especially caps & closures) intended for the primary packaging of medical and pharmaceutical applications. PH27D630 0.3
(190°C/2.16 kg)927 TDS SSS QUICK SDS > REACH > CONTACT > Low Density Polyethylene for Blow-Fill-Seal process (bottles & ampoules), intended for the primary packaging of medical and pharmaceutical applications. PH30D630 0.3
(190°C/2.16 kg)930 TDS SSS QUICK SDS > REACH > CONTACT > Low Density Polyethylene for Blow-Fill-Seal process (bottles & ampoules), intended for primary packaging of medical and pharmaceutical applications. -
MaterialLLDPEBrandBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS BPD3642 3
(190°C/2.16 kg)920 TDS SSS QUICK SDS > REACH > CONTACT > Power low voltage insulation & jacketing
Unstabilized C6-LLDPE with enhance properties for crosslinked LV insulation (Monosil®, Sioplas®) & base resin for high performance cable jacketing applications.BPD3669 3.3
(190°C/2.16 kg)926 TDS SSS QUICK SDS > REACH > CONTACT > Power low voltage insulation & jacketing
Unstabilized C6-LLDPE with enhance properties for crosslinked LV insulation (Monosil®, Sioplas®) & base resin for high performance cable jacketing applications.LL2635UA 3.3
(190°C/2.16 kg)926 500 TDS SSS QUICK SDS > REACH > CONTACT > Rotomoulding application; various applications with high flexibility, very high impact strength. LL6208AF 0.9
(190°C/2.16 kg)920 TDS SSS QUICK SDS > REACH > CONTACT > For use in rich blends in heavy duty sacks, liners and other thin film applications; artificial grass. LL6208LJ 0.9
(190°C/2.16 kg)921 TDS SSS QUICK SDS > REACH > CONTACT > For use in rich blends for heavy duty sacks, liners and other thin film applications requiring excellent mechanical and optical properties. LL6608AF 0.9
(190°C/2.16 kg)928 TDS SSS QUICK SDS > REACH > CONTACT > Lean and rich blend blown film applications such as rigid layers in co-extrusion, carrier bags, refuse sacks and liners; artificial grass. LL6910AA 1.0
(190°C/2.16 kg)936 TDS SSS QUICK SDS > REACH > CONTACT > For use in lean and rich blend blown film applications such as overwrap, counter bags, shrink film and boil-in-the-bag applications; artificial grass. LL6910KJ 1.0
(190°C/2.16 kg)937 TDS SSS QUICK SDS > REACH > CONTACT > Overwrap; nappy bags; lamination. LL6910LA 1.0
(190°C/2.16 kg)936 TDS SSS QUICK SDS > REACH > CONTACT > LL6910LA is rigid blown film grade offering a certified low level of gels making it ideal for lamination or thin film applications with highly decorative printing. LL8109AA 0.9
(190°C/2.16 kg)918 TDS SSS QUICK SDS > REACH > CONTACT > Mulch film; refuse sacks; liners; thin film applications. LL8109KB 0.9
(190°C/2.16 kg)920 TDS SSS QUICK SDS > REACH > CONTACT > Mulch film; refuse sacks; liners; thin film applications. -
MaterialLLDPEBrandEltexBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS LL2635UA 3.3
(190°C/2.16 kg)926 500 TDS SSS QUICK SDS > REACH > CONTACT > Rotomoulding application; various applications with high flexibility, very high impact strength. -
MaterialmLLDPEBrandBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS BPD3801 5.5
(190°C/2.16 kg)916 TDS SSS QUICK SDS > REACH > CONTACT > Power low voltage insulation & jacketing
Unstabilized C6-LLDPE with enhance properties for crosslinked LV insulation (Monosil®, Sioplas®) & base resin for high performance cable jacketing applications.PF0101KE 1.3
(190°C/2.16 kg)903 TDS SSS QUICK SDS > REACH > CONTACT > ELTEX®PF0101KE has been developed for use in highly technical film like food packaging, lamination and co-extrusion applications where superior mechanical and sealing performance is required. PF0101XA 1.3
(190°C/2.16 kg)902 TDS SSS QUICK SDS > REACH > CONTACT > ELTEX® PF0101XA has been developed for use in highly technical film like food packaging, lamination and co-extrusion applications where superior mechanical and sealing performance is required. PF0601XA 1.3
(190°C/2.16 kg)906 TDS SSS QUICK SDS > REACH > CONTACT > Eltex® PF0601XA has been developed for use in highly technical film like food packaging, lamination and co-extrusion applications where superior mechanical and sealing performance is required. PF6012AA 1.3
(190°C/2.16 kg)912 TDS SSS QUICK SDS > REACH > CONTACT > Eltex® PF6012AA is particularly suitable for multilayer film applications where it can be used neat or as a blending partner with LLDPE or LDPE in sealing layers. PF6012KJ 1.3
(190°C/2.16 kg)913 TDS SSS QUICK SDS > REACH > CONTACT > Eltex® PF6012KJ has been developed for use in highly technical film like food packaging, lamination, and other thin film applications where superior mechanical and sealing performance is required. PF6112AA 1.3
(190°C/2.16 kg)916 TDS SSS QUICK SDS > REACH > CONTACT > Eltex® PF6112AA has been developed for use in food packaging and other thin film applications where superior mechanical and optical performance is required. PF6130LA 3.5
(190°C/2.16 kg)918 TDS SSS QUICK SDS > REACH > CONTACT > High performance cast stretch film applications, in both monolayer and co-extruded structures. Designed for applications which require a very low level of gels. Can be used for the production of artificial grass monofilaments. PF6140AA 4.5
(190°C/2.16 kg)918 TDS SSS QUICK SDS > REACH > CONTACT > High performance cast stretch film applications, in both monolayer and co-extruded structures. PF6212AA 1.3
(190°C/2.16 kg)919 TDS SSS QUICK SDS > REACH > CONTACT > Consumer packaging; heavy duty sacks; thin film applications. PF6212AE 1.3
(190°C/2.16 kg)919 TDS SSS QUICK SDS > REACH > CONTACT > Food packaging and other thin film applications where excellent mechanical and optical performance is required. PF6212KE 1.3
(190°C/2.16 kg)920 TDS SSS QUICK SDS > REACH > CONTACT > Food packaging and other thin film applications where excellent mechanical and optical performance is required. PF6220AA 2.1
(190°C/2.16 kg)919 TDS SSS QUICK SDS > REACH > CONTACT > Consumer packaging; thin film applications. PF6220AE 2.1
(190°C/2.16 kg)919 TDS SSS QUICK SDS > REACH > CONTACT > Eltex® PF6220AE has been developed for use in food packaging and other thin film applications where excellent mechanical and optical performance is required. In addition, Eltex® PF6220AE offers easy extrudability. PF6220KJ 2.1
(190°C/2.16 kg)920 TDS SSS QUICK SDS > REACH > CONTACT > Consumer packaging; thin film applications. PF6612KE 1.3
(190°C/2.16 kg)927 TDS SSS QUICK SDS > REACH > CONTACT > Eltex® PF6612KE has been developed for use in collation shrinkwrap, food packaging, refuse sacks and other thin film applications where excellent balance between film strength and rigidity is required together with good optical properties. -
MaterialmLLDPEBrandEltex PFBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS PF0101KE 1.3
(190°C/2.16 kg)903 TDS SSS QUICK SDS > REACH > CONTACT > ELTEX®PF0101KE has been developed for use in highly technical film like food packaging, lamination and co-extrusion applications where superior mechanical and sealing performance is required. PF0101XA 1.3
(190°C/2.16 kg)902 TDS SSS QUICK SDS > REACH > CONTACT > ELTEX® PF0101XA has been developed for use in highly technical film like food packaging, lamination and co-extrusion applications where superior mechanical and sealing performance is required. PF0601XA 1.3
(190°C/2.16 kg)906 TDS SSS QUICK SDS > REACH > CONTACT > Eltex® PF0601XA has been developed for use in highly technical film like food packaging, lamination and co-extrusion applications where superior mechanical and sealing performance is required. PF6012AA 1.3
(190°C/2.16 kg)912 TDS SSS QUICK SDS > REACH > CONTACT > Eltex® PF6012AA is particularly suitable for multilayer film applications where it can be used neat or as a blending partner with LLDPE or LDPE in sealing layers. PF6012KJ 1.3
(190°C/2.16 kg)913 TDS SSS QUICK SDS > REACH > CONTACT > Eltex® PF6012KJ has been developed for use in highly technical film like food packaging, lamination, and other thin film applications where superior mechanical and sealing performance is required. PF6112AA 1.3
(190°C/2.16 kg)916 TDS SSS QUICK SDS > REACH > CONTACT > Eltex® PF6112AA has been developed for use in food packaging and other thin film applications where superior mechanical and optical performance is required. PF6130LA 3.5
(190°C/2.16 kg)918 TDS SSS QUICK SDS > REACH > CONTACT > High performance cast stretch film applications, in both monolayer and co-extruded structures. Designed for applications which require a very low level of gels. Can be used for the production of artificial grass monofilaments. PF6140AA 4.5
(190°C/2.16 kg)918 TDS SSS QUICK SDS > REACH > CONTACT > High performance cast stretch film applications, in both monolayer and co-extruded structures. PF6212AA 1.3
(190°C/2.16 kg)919 TDS SSS QUICK SDS > REACH > CONTACT > Consumer packaging; heavy duty sacks; thin film applications. PF6212AE 1.3
(190°C/2.16 kg)919 TDS SSS QUICK SDS > REACH > CONTACT > Food packaging and other thin film applications where excellent mechanical and optical performance is required. PF6212KE 1.3
(190°C/2.16 kg)920 TDS SSS QUICK SDS > REACH > CONTACT > Food packaging and other thin film applications where excellent mechanical and optical performance is required. PF6220AA 2.1
(190°C/2.16 kg)919 TDS SSS QUICK SDS > REACH > CONTACT > Consumer packaging; thin film applications. PF6220AE 2.1
(190°C/2.16 kg)919 TDS SSS QUICK SDS > REACH > CONTACT > Eltex® PF6220AE has been developed for use in food packaging and other thin film applications where excellent mechanical and optical performance is required. In addition, Eltex® PF6220AE offers easy extrudability. PF6220KJ 2.1
(190°C/2.16 kg)920 TDS SSS QUICK SDS > REACH > CONTACT > Consumer packaging; thin film applications. PF6612KE 1.3
(190°C/2.16 kg)927 TDS SSS QUICK SDS > REACH > CONTACT > Eltex® PF6612KE has been developed for use in collation shrinkwrap, food packaging, refuse sacks and other thin film applications where excellent balance between film strength and rigidity is required together with good optical properties. -
MaterialRCPBrandBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS 200-CA02 1.7
(230°C/2.16 kg)1000 TDS SSS QUICK SDS > REACH > CONTACT > Sheets, trays and containers for food products, blown film. Good heat resistance, excellent transparency. 200-CA10 10
(230°C/2.16 kg)1200 TDS SSS QUICK SDS > REACH > CONTACT > Extrusion of fibres with the spunbond technology. It is also suitable for extrusion of continuous filaments (CF) 200-CA13 13
(230°C/2.16 kg)1100 TDS SSS QUICK SDS > REACH > CONTACT > 200-CA13 is designed for transparent injection moulded houseware, closures and food packaging needing goodimpact strength and excellent organoleptic properties. 200-CA13 is also suitable for injection stretch blow moulding (ISBM). 200-CA20 20
(230°C/2.16 kg)900 TDS SSS QUICK SDS > REACH > CONTACT > Household goods, thin wall packaging, caps. 200-CA25 25
(230°C/2.16 kg)1100 TDS SSS QUICK SDS > REACH > CONTACT > 200-CA25 is a clarified random copolymer with a medium ethylene content and good flow primarily intended for injection moulding of clear articles. 200-CA25 has a property profile also suitable for injection stretch blow moulding (ISBM). 200-CA40 40
(230°C/2.16 kg)1100 TDS SSS QUICK SDS > REACH > CONTACT > 200-CA40 is a clarified random copolymer with a medium ethylene content for the fast production of clear thin-walled injection-moulded articles. 200-CA70 70
(230°C/2.16 kg)1100 TDS QUICK SDS > REACH > CONTACT > 200-CA70 is a very high flow clarified random copolymer with a medium ethylene content specifically designed for the production of clear thin-walled injection-moulded articles. 200-GA02 2
(230°C/2.16 kg)950 TDS SSS QUICK SDS > REACH > CONTACT > Sheets, trays and containers for food products. Good heat resistance, good transparency. 200-GA04 3.8
(230°C/2.16 kg)950 TDS SSS QUICK SDS > REACH > CONTACT > Sheets, trays and containers for food products. Good transparency, improved processability. 200-GB02 1.8
(230°C/2.16 kg)1000 TDS SSS QUICK SDS > REACH > CONTACT > Food packaging, textile packaging, flowers packaging, lamination films and stationary supplies. 200-MG02 1.8
(230°C/2.16 kg)900 TDS QUICK SDS > REACH > CONTACT > Medical and pharmaceutical applications : blow-fill-seal of bottles and ampoules, blow-moulding and injection - sterilisable at 121°C. 200-NA02 2
(230°C/2.16 kg)1000 TDS SSS QUICK SDS > REACH > CONTACT > Sheets, trays and containers for food products. Good heat resistance, excellent transparency. 200-SB08 8
(230°C/2.16 kg)950 TDS SSS QUICK SDS > REACH > CONTACT > It is intended for food, magazine or textile packaging, for lamination films… as well as for stationary supplies. 200-TG03 2
(230°C/2.16 kg)1100 TDS QUICK SDS > REACH > CONTACT > Polypropylene 200-TG03 is a random copolymer polypropylene suitable for extrusion applications. 201-MG02 1.8
(230°C/2.16 kg)900 TDS QUICK SDS > REACH > CONTACT > Extrusion blow-moulding of medical containers and medical devices, to the exclusion of implants. 203-CA25 25
(230°C/2.16 kg)1100 TDS SSS QUICK SDS > REACH > CONTACT > 203-CA25 is a clarified random copolymer with a medium ethylene content and good flow primarily intended for injection moulding of clear articles as transparent thin wall injection moulding, caps and closures, Housewares or clarified food containers. 203-NA02 1.9
(230°C/2.16 kg)1150 TDS SSS QUICK SDS > REACH > CONTACT > High heat resistance with good clarity makes it ideal for various hot fill bottle applications. 203-OR25 25
(230°C/2.16 kg)1100 TDS SSS QUICK SDS > REACH > CONTACT > 203-OR25 is a clarified random copolymer with a medium ethylene content and good flow primarily intended for injection moulding of clear articles. 203-OR25 presents itself with very low odour and smell. 205-CA25 25
(230°C/2.16 kg)1100 TDS SSS QUICK SDS > REACH > CONTACT > 205-CA25 is a clarified random copolymer with a medium ethylene content and good flow primarily intended for injection moulding of high transparency articles. 205-CA25 has a property profile also suitable for injection stretch blow moulding (ISBM). 205-CA40 40
(230°C/2.16 kg)1100 TDS SSS QUICK SDS > REACH > CONTACT > 205-CA40 is a clarified random copolymer with a medium ethylene content for the fast production of high transparency thin-walled injection-moulded articles. 240-CA12 13
(230°C/2.16 kg)850 TDS SSS QUICK SDS > REACH > CONTACT > RCP for transparent packaging requiring excellent impact. 240-GA09 9
(230°C/2.16 kg)850 TDS SSS QUICK SDS > REACH > CONTACT > Intended for food, magazine or textile packaging, for lamination films… as well as for stationary supplies. 240-MS23 23
(230°C/2.16 kg)980 TDS SSS QUICK SDS > REACH > CONTACT > External barrel for disposable syringes (not pre-filled) / Transparent thin wall injection moulding. 240-NA02 1.5
(230°C/2.16 kg)900 TDS SSS QUICK SDS > REACH > CONTACT > Clarified grade offering outstanding clarity for the production of small to medium sized bottles. 240-SB09 9
(230°C/2.16 kg)850 TDS SSS QUICK SDS > REACH > CONTACT > It is intended for food, magazine or textile packaging, for lamination films… as well as for stationary supplies. 242-NA02 1.8
(230°C/2.16 kg)900 TDS SSS QUICK SDS > REACH > CONTACT > Highly clarified random copolymer for extrusion blow moulding, sheet extrusion, clear thermoformed packaging and high clarity blown films. Its formulation allows use for multilayer as well as monolayer structures. It is also suitable for injection stretch blow moulding (ISBM). 243-NA02 1.8
(230°C/2.16 kg)900 TDS SSS QUICK SDS > REACH > CONTACT > Designed for blow molding applications (mono and multi-layers) for food and non-food packaging of sauces, detergents and soaps, cosmetics and for sheets extrusion. rPP2013 13
(230°C/2.16 kg)1150 TDS SSS QUICK SDS > REACH > CONTACT > Injection-moulding of technical parts, non-food caps, closures and trays rPP2028 32
(230°C/2.16 kg)1150 TDS SSS QUICK SDS > REACH > CONTACT > Injection-moulding of technical parts, non-food caps, closures and trays rPP2030C 32
(230°C/2.16 kg)1150 TDS SSS QUICK SDS > REACH > CONTACT > Injection-moulding of technical parts, non-food & cosmetic caps, closures and trays -
MaterialRCPBrandEltex MEDBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS 200-MG02 1.8
(230°C/2.16 kg)900 TDS QUICK SDS > REACH > CONTACT > Medical and pharmaceutical applications : blow-fill-seal of bottles and ampoules, blow-moulding and injection - sterilisable at 121°C. 240-MS23 23
(230°C/2.16 kg)980 TDS SSS QUICK SDS > REACH > CONTACT > External barrel for disposable syringes (not pre-filled) / Transparent thin wall injection moulding. -
MaterialRCPBrandRecycl-INBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS rPP2013 13
(230°C/2.16 kg)1150 TDS SSS QUICK SDS > REACH > CONTACT > Injection-moulding of technical parts, non-food caps, closures and trays rPP2028 32
(230°C/2.16 kg)1150 TDS SSS QUICK SDS > REACH > CONTACT > Injection-moulding of technical parts, non-food caps, closures and trays rPP2030C 32
(230°C/2.16 kg)1150 TDS SSS QUICK SDS > REACH > CONTACT > Injection-moulding of technical parts, non-food & cosmetic caps, closures and trays -
MaterialRCP PowderBrandEltex PBusinessINEOS O & P Europe
INEOS O & P USA
-
MaterialPEBrandBusinessINEOS O & P USAGrades
GRADE MFR
(g/10 min)DENSITY
(g/cm³)NOTCHED IZOD IMPACT
(ft-lb/in)TECH
DATA
SHEETSDS REGULATORY
POSITION
STATEMENTCONTACT TYPICAL APPLICATIONS CAP311US 3.8 MI2
(190°C/2.16kg)0.9600 <1 TDS SDS RPS CONTACT > applications requiring excellent processability, high rigidity, enhanced stress cracking resistance and excellent organoleptic properties CAP311US1 3.8 g/10 min (190░C/2.16kg) 0.9600 <1 TDS RPS CONTACT > Application requiring excellent processability, high rigidity, enhanced stress cracking resistance, and excellent organoleptic properties. CAP311US2 3.8 MI2
(190°C/2.16kg)0.9600 <1 TDS SDS RPS CONTACT > Applications requiring excellent processability, high rigidity, enhanced stress cracking resistance and excellent organoleptic properties J50-2000-119 20.0 MI2
(190°C/2.16kg)0.9530 TDS SDS RPS CONTACT > High flow copolymer for Caps & Closures applications J52-08-226 9.0 HLMI
(190°C/21.6kg)0.9510 TDS SDS RPS CONTACT > copolymer for thin gauge blown film applications where good processability, high stiffness and excellent strength are required T50-1000-181 11.0 MI2
(190°/2.16 kg)0.9510 TDS SDS RPS CONTACT > General purpose injection molding for applications requiring lubrication. T50-1000-187 11.0 MI2
(190°/2.16 kg)0.9510 TDS SDS RPS CONTACT > General purpose injection molding for applications requiring lubrication. T50-200-178 2.0 MI2
(190°/2.16 kg)0.9510 TDS SDS RPS CONTACT > Injection molding applications which require high impact resistance and good environmental stress crack resistance TUB121NTW 8.0 HLMI
(190°C/21.6kg)0.9490 TDS SDS RPS CONTACT > Natural bimodal copolymer designed for large diameter, thick wall piping for potable water, industrial and mining applications. -
MaterialPPBrandBusinessINEOS O & P USAGrades
GRADE MFR
(g/10 min)DENSITY
(g/cm³)NOTCHED IZOD IMPACT
(ft-lb/in)TECH
DATA
SHEETSDS REGULATORY
POSITION
STATEMENTCONTACT TYPICAL APPLICATIONS 3950 34.0
(230°C/2.16kg)2.8 TDS SDS RPS CONTACT > High flow impact copolymer for automotive interiors H00G-00 0.7
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > High stiffness grade for containers such as auto under-hood reservoirs H01H-00 1.7
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Long-term heat aging homopolymer grade for thermoformed sheet H02C-00 2.3
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > High clarity, nucleated homopolymer grade for thermoformed packaging H02C-01 2.3
(230°C/2.16kg)1 TDS SDS RPS CONTACT > Low plate-out, high clarity, nucleated homopolymer grade for thermoforming H02C-04 2.3
(230°C/2.16kg)1.2 TDS SDS RPS CONTACT > Thermoforming grade with new nucleator technology providing enhanced clarity H02G-02 2.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > General purpose homopolymer for BOPP, tape, twine, woven bag andthermoformed sheet H03G-06 3.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Homopolymer designed for BOPP applications H03W-00 3.5
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > General purpose low water carry-over homopolymer grade H03W-01 3.6
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Low water carry-overhomopolymer for cordage, carpet backing, industrial fabrics, and geotextiles H03W-02 3.0
(230°C/2.16kg)<1 TDS SDS RPS CONTACT > Low water carryover general purpose homopolymer extrusion grade H04W-01 4.2
(230°C/2.16kg)<1 TDS SDS RPS CONTACT > Designed for extrusion processing in applications that require low water carry-over. H05A-01 5.1
(230°C/2.16kg)<1 TDS SDS RPS CONTACT > Consumer products, housewares, medical packaging and rigid packaging. H05H-01 5.6
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Long-term heat aging homopolymer for appliances and automotive H07N-00 7.3
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Barefoot homopolymer with nucleation designed for extrusion processing H08U-00 8.0
(230°C/2.16kg)<1 TDS SDS RPS CONTACT > Designed for fiber spinning applications requiring UV protection. H12E-00 12.5
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Homopolymer grade with high antistat level for closure applications H12G-00 12.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > General purpose homopolymer for consumer and closure applications H12G-01 12.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > General purpose homopolymer suitable for extrusion and injection molding. Uses include extruded sheet, BOPP film, housewares, rigid packaging, caps and closures H12Z-00 12.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Antistated, nucleated homopolymer for consumer & closure applications H12Z-02 12.8
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Antistated, nucleated homopolymer for closure applications H12Z-03 12.0
(230°C/2.16kg)<1 TDS SDS RPS CONTACT > Antistated, nucleated homopolymer designed for optimal processing and surface appearance in injection molding applications H13M-00 13.5
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Medium-term heat aging homopolymer for packaging, closures & consumer products H14A-00 14.3
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Antistated homopolymer for packaging, closures & consumer products H17U-00 17.0
(230°C/2.16kg)<1 TDS SDS RPS CONTACT > Designed for carpet fiber applications. H19G-01 19.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > General purpose fiber grade homopolymer H20A-00 20.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Injection molding grade with moderate levels of antistat H20E-00 20.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Injection molding grades with high level of antistat H20G-00 20.0
(230°C/2.16kg)TDS SDS RPS CONTACT > General purpose homopolymer for consumer, housewares, and rigid packaging H20H-00 20.5
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Long-term heat aging homopolymer for appliances, consumer, housewares, and rigid packaging H20Z-00 20.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Antistated, nucleated homopolymer for consumer and rigid packaging H28E-00 28.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Homopolymer with high antistat levels for consumer, rigid packaging and closures applications H28G-00 28.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Controlled rheology polypropylene homopolymer designed for high tenacity yarn applications. H35G-02 35.0
(230°C/2.16kg)<1 TDS SDS RPS CONTACT > General purpose homopolymer for consumer. housewares, and rigid packaging H35Z-00 35.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Antistated, nucleated, high flow homopolymer for rigid packaging and housewares H35Z-02 35.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > nucleated, antistated, high flow rate, homopolymer for housewares, medical components and thin-walled rigid packaging H38G-02 38.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Homopolymer for spunbonded nonwovens and partially oriented yarn (POY) H44N-00 47.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > High flow rate, nucleated polypropylene to improve isotropic shrinkage and prevent warpage H53N-00 53.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Nucleated high MFR homopolymer with lubricant for high speed injection molding applications, such as media and thin walled packaging and housewares L10G-00 10.0
(230°C/2.16kg)2.5 TDS SDS RPS CONTACT > General impact grade designed for injection molding applications L12N-00 12.0
(230°C/2.16kg)5.7 TDS SDS RPS CONTACT > High gloss, nucleated impact copolymer for automotive, consumer and housewares applications L12Z-00 12.0
(230°C/2.16kg)2.6 TDS SDS RPS CONTACT > Antistatted and nucleated impact copolymer for housewares, consumer products and toys L12Z-01 12.0
(230°C/2.16kg)3.4 TDS SDS RPS CONTACT > High gloss, nucleated and antistatted impact copolymer for automotive, toys, consumer and housewares applications L34N-00 34.0
(230°C/2.16kg)2.8 TDS SDS RPS CONTACT > Nucleated, low gloss impact copolymer for housewares and consumer products L70Z-01 70.0
(230°C/2.16kg)2.3 TDS SDS RPS CONTACT > Nucleated, antistated, high flow, medium impact impact coplymer for injection molding applications L90G-00 90.0
(230°C/2.16kg)0.9100 1.1 TDS SDS RPS CONTACT > High MFR impact copolymer for high speed injection molding and compounding. N00M-00 0.45
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Impact copolymer with good stiffness/impact balance for high impact thermoformed packaging N00N-00 0.35
(230°C/2.16kg)NB TDS SDS RPS CONTACT > High-impact impact copolymer designed for non-pressure structured wall pipe N01N-00 1.9
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Impact copolymer with good stiffness/impact balance for freezer-to-microwave thermoformed packaging N02G-00 2.5
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Impact copolymer with good stiffness/impact balance for high impact thermoformed packaging N05U-00 5.0
(230°C/2.16kg)7.4 TDS SDS RPS CONTACT > UV stabilized grade for materials handling N12N-00 12.0
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Nucleated grade with good stiffness/impact balance for compounding and injection molding applications. N12Z-00 12.0
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Nucleated and antistated impact copolymer designed for injection molding applications. N12Z-01 14.0
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Nucleated and antistatic polypropylene impact copolymer designed for injection molding applications. N20G-00 20.0
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Impact copolymer with good stiffness/impact balance for toys andconsumer products N20N-00 20.0
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Nucleated and antistattedimpact copolymer with good stiffness/impact balance for materials handling, toys and consumer products R01A-00 1.9
(230°C/2.16kg)1.6 TDS SDS RPS CONTACT > Balance of stiffness, impact, contact clarity; suitable for hot fill R01C-00 1.9
(230°C/2.16kg)5.6 TDS SDS RPS CONTACT > Clarified grade with balance of stiffness, impact; suitable for hot fill R01C-01 1.9
(230°C/2.16kg)6.4 TDS SDS RPS CONTACT > Clarified, low plate-out grade with balance of stiffness, impact; hot fill R02C-00 2.3 (230°C/2.16kg) 0.9030 0.8 TDS SDS RPS CONTACT > Sheet extrusion and thermoforming of clear food containers and lids. R08G-00 8.0 (230°/2.16kg) 0.9000 1.0 TDS SDS RPS CONTACT > Film, blow molding, expanded PP beads, injection molding R08S-00 8 .0
(230°C/2.16kg)1.4 TDS SDS RPS CONTACT > Random copolymer with slip agent R12C-01 12.0
(230°C/2.16kg)1.2 TDS SDS RPS CONTACT > Low antistat, clarified grade for injection stretch blow molding R35C-01 35.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Antistated version of R35C-00 R35C-02 35.0
(230°C/2.16kg)1.1 TDS SDS RPS CONTACT > Clarified and lubricated random copolymer for medium and thin wall molding applications giving a bluish hue of enhanced and distinctive clarity R35C-03 35.0
(230°C/2.16kg)0.9000 1.1 TDS SDS RPS CONTACT > Thin wall clear parts R55C-00 55.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Clarified and antistatic random copolymer for thin wall molding applications requiring very good mold filling capabilities, excellent clarity, fast cycle times and good stiffness-to-impact properties balance R55C-01 55.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Lubricated and antistatic random copolymer designed for high-speed injection molding of medium to thin walled parts requiring excellent clarity, fast cycle times and ease of de-nesting T00G-00 0.6
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Special fractional melt flow rate impact copolymer designed for highly flexible, high impact, soft touch and certain FDA applications T00G-02 0.6
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Special fractional melt flow rate impact copolymer designed for highly flexible, high impact, soft touch and certain FDA applications T10G-03 10.0
(230°C/2.16kg)NB TDS SDS RPS CONTACT > TPO designed for roofing, compounding and soft applications
INEOS Oligomers
-
MaterialGAS/SPEC Gas Treating AminesBrandBusinessINEOS OligomersGrades
PRODUCT
GRADECARBON
CHAINMOL.
WEIGHT
(Mn)KINEMATIC
VISCOSITYTECH
DATA
SHEETSALES SPECS SDS CONTACT APPLICATIONS GAS/SPEC CS-1 CONTACT > GAS/SPEC CS-1 specialty amine is a formulated MDEA (methyldiethanolamine) solvent designed for removal of H2S and CO2 from gas or liquid hydrocarbon streams. GAS/SPEC CS-1 is typically used in applications where low levels of CO2 are required in the treated gas. GAS/SPEC CS-1 provides greater gas removal capacity per volume of circulating solution than generic amines such as monoethanolamine (MEA) or diethanolamine (DEA). GAS/SPEC CS-1 is less corrosive than generic amines and can be used at up to 50 weight % amine strength, which reduces amine circulation rate and energy usage. This translates into lower operating costs and increased capacity for existing equipment and reduced capital for new equipment. Treament of natural gas, LPG, and ethane are typical applications. GAS/SPEC CS-1000 CONTACT > GAS/SPEC CS-1000 is a methyldiethanolamine (MDEA) based solvent formulated to provide deep removal of carbon dioxide (CO2) from gas processing applications. GAS/SPEC CS-1000 allows for greater CO2 removal capacity with superior chemical stability, lower corrosion and longer product life under extreme conditions than MEA (monoethanolamine) or DEA (diethanolamine). GAS/SPEC CS-1000 solvent should be considered mainly for applications in which the treated gas CO2 specification is less than 1000 ppmv. GAS/SPEC CS-1000 can be used to replace MDEA-piperazine blends in all applications. Typical ones include ammonia, hydrogen plants and ethane treating. GAS/SPEC CS-3 CONTACT > GAS/SPEC CS-3 Specialty Amine is specifically designed for near complete removal of H2S and moderate removal of CO2 from gas or liquid streams. This solvent is ideal for gas treating applications where some CO2 in the treated gas is desired. By allowing a portion of the CO2 to remain, GAS/SPEC CS-3 can increase the treating capacity or reduce the energy costs of the amine system with significantly less corrosion than diethanolamine (DEA) or monoethanolamine (MEA). GAS/SPEC SS CONTACT > GAS/SPEC SS Specialty Amine is an INEOS formulated MDEA (methyldiethanolamine) specifically designed for the gas treating industry. It selectively removes H2S over CO2 from a gas or liquid stream, which results in greater acid gas removal capacity per volume of circulating solution than amines such as monoethanolamine (MEA), diethanolamine (DEA), and diisopropanolamine (DIPA). GAS/SPEC SS is less corrosive and less prone to degradation than MEA, DEA, or DIPA and it can be used at up to 50 weight % amine strength, which reduces amine circulation rate and energy usage. This translates into lower operating costs and increased capacity for existing equipment and reduced capital for new equipment. Applications include coal gasification and tail gas treating. GAS/SPEC SS-3 CONTACT > GAS/SPEC SS-3 Specialty Amine is formulated for use in applications where selective removal of H2S from gas streams is required. GAS/SPEC SS-3 not only removes H2S to lower levels than MDEA (methyldiethanolamine) alone, but also improves CO2 slip. Increased selectivity for H2S over CO2 allows the plant to increase treating capacity, lower energy usage, and improve the quality of acid gas going to the sulfur plant. GAS/SPEC TG-10 CONTACT > GAS/SPEC TG-10 Specialty Amine is specifically designed for meeting a 10 ppmv H2S specification in tail gas treating applications. GAS/SPEC TG-10 is ideal for meeting stringent regulatory requirements and reducing the final SO2 effluent associated with tail gas treaters. GAS/SPEC TG-10 can allow you to realize near 99.9% sulfur conversion. This product can help meet the lower specifications without the penalty of increased CO2 pickup so there is no reduction in sulfur plant capacity. -
MaterialHydrogenated PolydeceneBrandSilkflo®BusinessINEOS OligomersGrades
PRODUCT
GRADECARBON
CHAINMOL.
WEIGHT
(Mn)KINEMATIC
VISCOSITYTECH
DATA
SHEETSALES SPECS SDS CONTACT APPLICATIONS Silkflo 362 287 1.7 cSt @ 100°C TDS SDS CONTACT > Silkflo 362 is a 2 cSt (mm2/S) hydrogenated Didecene base fluid for cosmetic applications. Silkflo 364 438 3.9 cSt @ 100°C TDS SDS CONTACT > Silkflo 364 is a 4 cSt (mm2/S) hydrogenated Polydecene base fluid for cosmetic applications. Silkflo 366 531 5.9 cSt @ 100°C TDS SDS CONTACT > Silkflo 366 is a 6 cSt (mm2/S) hydrogenated Polydecene base fluid for cosmetic applications. -
MaterialLinear Alpha Olefin (LAO)/Internal Olefin (IO)BrandAmodrill®BusinessINEOS OligomersGrades
PRODUCT
GRADECARBON
CHAINMOL.
WEIGHT
(Mn)KINEMATIC
VISCOSITYTECH
DATA
SHEETSALES SPECS SDS CONTACT APPLICATIONS Amodrill 1200 2.25 cSt @ 40 ºC TDS SDS CONTACT > Oilfield drilling fluids, used in offshore applications Amodrill 1230 2.14 cSt @ 40 ºC TDS SDS CONTACT > Oilfield drilling fluids, used in offshore applications -
MaterialSpecialty OligomersBrandBusinessINEOS OligomersGrades
PRODUCT
GRADECARBON
CHAINMOL.
WEIGHT
(Mn)KINEMATIC
VISCOSITYTECH
DATA
SHEETSALES SPECS SDS CONTACT APPLICATIONS Diisobutylene C8 TDS SSS SDS CONTACT > Octylphenol resins used as tackifiers in radial tires, Octylated diphenylamine stabilizers for lubricants and rubbers, Isononyl derivatives used to produce polymerization initiators and compressor fluids, Sulfur additives for anti-wear lubricants and HALS stabilizers for outdoor polyolefin applications, co-monomer in the production of elastomers and hydrocarbon resins, chain stopper for polycarbonate resins Diisobutylene HP C8 TDS SSS SDS CONTACT > Octylphenol resins used as tackifiers in radial tires, Octylated diphenylamine stabilizers for lubricants and rubbers, Isononyl derivatives used to produce polymerization initiators and compressor fluids, Sulfur additives for anti-wear lubricants and HALS stabilizers for outdoor polyolefin applications, co-monomer in the production of elastomers and hydrocarbon resins, chain stopper for polycarbonate resins Diisobutylene 99 C8 TDS SSS SDS CONTACT > Octylphenol resins used as tackifiers in radial tires, Octylated diphenylamine stabilizers for lubricants and rubbers, Isononyl derivatives used to produce polymerization initiators and compressor fluids, Sulfur additives for anti-wear lubricants and HALS stabilizers for outdoor polyolefin applications, co-monomer in the production of elastomers and hydrocarbon resins, chain stopper for polycarbonate resins Isododecane C12 1.33 cSt @ 40C TDS SSS SDS CONTACT > Particularly suitable for all applications in which stringent demands are made regarding purity and chemical stability. An important use of Isododecane is in the polymerization processes (e.g. low density polyethylene, polypropylene, PVC, styrenics and synthetic rubbers), where it is used as either a solvent or as a dispersing agent for high reactivity organic peroxide catalysts. Its low odour, very low toxicity, and easily detectable solvent residues are important properties for film applications. Other uses are for cosmetics, insecticide solutions and solvents.
INEOS Oxide
-
MaterialAcetate EstersBrandBusinessINEOS OxideGrades
GRADE MORE CONTACT APPLICATIONS Isopropyl Acetate Login CONTACT > Isopropyl acetate is an excellent solvent for a large range of synthetic resins and is miscible with all common organic liquids. It finds extensive application in ink formulations, surface coatings, adhesives and pharmaceutical industries. Isopropyl Acetate High Purity Login CONTACT > Isopropyl acetate is an excellent solvent for a large range of synthetic resins and is miscible with all common organic liquids. It finds extensive application in ink formulations, surface coatings, adhesives and pharmaceutical industries. n-Propyl Acetate Login CONTACT > n-Propyl acetate is a versatile solvent which is primarily used in paints, coatings and inks formulations. It can be used also in sealants and adhesives, in pharmaceutical applications, in the textile industry, in cleaning formulations and as extraction solvent. -
MaterialAlkoxylatesBrandBusinessINEOS OxideGrades
GRADE MORE CONTACT APPLICATIONS Alkyl Ether AE2 Login CONTACT > INEOS Oxide’s fatty alcohol ethoxylates are non-ionic surfactants obtained by adding ethylene oxide to linear fatty alcohols having a C12-C16 alkyl chain. Their main application is as a raw material for cleaning agents, laundry detergents and diswashing agents. Alkyl Ether AE3 Login CONTACT > INEOS Oxide’s fatty alcohol ethoxylates are non-ionic surfactants obtained by adding ethylene oxide to linear fatty alcohols having a C12-C16 alkyl chain. Their main application is as a raw material for cleaning agents, laundry detergents and diswashing agents. Alkyl Ether AE5 Login CONTACT > INEOS Oxide’s fatty alcohol ethoxylates are non-ionic surfactants obtained by adding ethylene oxide to linear fatty alcohols having a C12-C16 alkyl chain. Their main application is as a raw material for cleaning agents, laundry detergents and diswashing agents. Alkyl Ether AE7 Login CONTACT > INEOS Oxide’s fatty alcohol ethoxylates are non-ionic surfactants obtained by adding ethylene oxide to linear fatty alcohols having a C12-C16 alkyl chain. Their main application is as a raw material for cleaning agents, laundry detergents and diswashing agents. Alkyl Ether LM 1 Login CONTACT > INEOS Oxide’s fatty alcohol ethoxylates are non-ionic surfactants obtained by adding ethylene oxide to linear fatty alcohols having a C12-C16 alkyl chain. Their main application is as a raw material for cleaning agents, laundry detergents and diswashing agents. Alkyl Ether LM 7 Login CONTACT > INEOS Oxide’s fatty alcohol ethoxylates are non-ionic surfactants obtained by adding ethylene oxide to linear fatty alcohols having a C12-C16 alkyl chain. Their main application is as a raw material for cleaning agents, laundry detergents and diswashing agents. Antifoam RTB3510 Login CONTACT > EO/PO block copolymers belong to a versatile range of non-ionic, low-foaming surfactants of ethylene oxide and propylene oxide. The composition can be a PO block flanked by polyethylene oxide chains, generating two primary hydroxyl groups (TB series); or a reversed structure, where a central EO block is sandwiched between polypropylene oxide groups resulting in an overtone of secondary hydroxyl end groups (RTB series). Adjusting the sizes of both chains allows the synthesis of materials with great flexibility in chemical and physical properties. This results in a wide range of applications such as antifoams, plasticizers, lubricants, detergents and cleaners. Antifoam RTC5035 Login CONTACT > Polyether polyols are addition polymers of propylene oxide and various polyol initiators such as glycerol. Main applications are in the production of polyurethane foams and use as antifoams. Block Copolymer TB12087 Login CONTACT > EO/PO block copolymers belong to a versatile range of non-ionic, low-foaming surfactants of ethylene oxide and propylene oxide. The composition can be a PO block flanked by polyethylene oxide chains, generating two primary hydroxyl groups (TB series); or a reversed structure, where a central EO block is sandwiched between polypropylene oxide groups resulting in an overtone of secondary hydroxyl end groups (RTB series). Adjusting the sizes of both chains allows the synthesis of materials with great flexibility in chemical and physical properties. This results in a wide range of applications such as antifoams, plasticizers, lubricants, detergents and cleaners. Block Copolymer TB19095 Login CONTACT > EO/PO block copolymers belong to a versatile range of non-ionic, low-foaming surfactants of ethylene oxide and propylene oxide. The composition can be a PO block flanked by polyethylene oxide chains, generating two primary hydroxyl groups (TB series); or a reversed structure, where a central EO block is sandwiched between polypropylene oxide groups resulting in an overtone of secondary hydroxyl end groups (RTB series). Adjusting the sizes of both chains allows the synthesis of materials with great flexibility in chemical and physical properties. This results in a wide range of applications such as antifoams, plasticizers, lubricants, detergents and cleaners. Block Copolymer TB2540 Login CONTACT > EO/PO block copolymers belong to a versatile range of non-ionic, low-foaming surfactants of ethylene oxide and propylene oxide. The composition can be a PO block flanked by polyethylene oxide chains, generating two primary hydroxyl groups (TB series); or a reversed structure, where a central EO block is sandwiched between polypropylene oxide groups resulting in an overtone of secondary hydroxyl end groups (RTB series). Adjusting the sizes of both chains allows the synthesis of materials with great flexibility in chemical and physical properties. This results in a wide range of applications such as antifoams, plasticizers, lubricants, detergents and cleaners. Block Copolymer TB4010 Login CONTACT > EO/PO block copolymers belong to a versatile range of non-ionic, low-foaming surfactants of ethylene oxide and propylene oxide. The composition can be a PO block flanked by polyethylene oxide chains, generating two primary hydroxyl groups (TB series); or a reversed structure, where a central EO block is sandwiched between polypropylene oxide groups resulting in an overtone of secondary hydroxyl end groups (RTB series). Adjusting the sizes of both chains allows the synthesis of materials with great flexibility in chemical and physical properties. This results in a wide range of applications such as antifoams, plasticizers, lubricants, detergents and cleaners. Block Copolymer TB4040 Login CONTACT > EO/PO block copolymers belong to a versatile range of non-ionic, low-foaming surfactants of ethylene oxide and propylene oxide. The composition can be a PO block flanked by polyethylene oxide chains, generating two primary hydroxyl groups (TB series); or a reversed structure, where a central EO block is sandwiched between polypropylene oxide groups resulting in an overtone of secondary hydroxyl end groups (RTB series). Adjusting the sizes of both chains allows the synthesis of materials with great flexibility in chemical and physical properties. This results in a wide range of applications such as antifoams, plasticizers, lubricants, detergents and cleaners. Block Copolymer TB4510 Login CONTACT > EO/PO block copolymers belong to a versatile range of non-ionic, low-foaming surfactants of ethylene oxide and propylene oxide. The composition can be a PO block flanked by polyethylene oxide chains, generating two primary hydroxyl groups (TB series); or a reversed structure, where a central EO block is sandwiched between polypropylene oxide groups resulting in an overtone of secondary hydroxyl end groups (RTB series). Adjusting the sizes of both chains allows the synthesis of materials with great flexibility in chemical and physical properties. This results in a wide range of applications such as antifoams, plasticizers, lubricants, detergents and cleaners. Block Copolymer TB5031 Login CONTACT > EO/PO block copolymers belong to a versatile range of non-ionic, low-foaming surfactants of ethylene oxide and propylene oxide. The composition can be a PO block flanked by polyethylene oxide chains, generating two primary hydroxyl groups (TB series); or a reversed structure, where a central EO block is sandwiched between polypropylene oxide groups resulting in an overtone of secondary hydroxyl end groups (RTB series). Adjusting the sizes of both chains allows the synthesis of materials with great flexibility in chemical and physical properties. This results in a wide range of applications such as antifoams, plasticizers, lubricants, detergents and cleaners. Block Copolymer TB5432 Login CONTACT > EO/PO block copolymers belong to a versatile range of non-ionic, low-foaming surfactants of ethylene oxide and propylene oxide. The composition can be a PO block flanked by polyethylene oxide chains, generating two primary hydroxyl groups (TB series); or a reversed structure, where a central EO block is sandwiched between polypropylene oxide groups resulting in an overtone of secondary hydroxyl end groups (RTB series). Adjusting the sizes of both chains allows the synthesis of materials with great flexibility in chemical and physical properties. This results in a wide range of applications such as antifoams, plasticizers, lubricants, detergents and cleaners. Block Copolymer TB6010 Login CONTACT > EO/PO block copolymers belong to a versatile range of non-ionic, low-foaming surfactants of ethylene oxide and propylene oxide. The composition can be a PO block flanked by polyethylene oxide chains, generating two primary hydroxyl groups (TB series); or a reversed structure, where a central EO block is sandwiched between polypropylene oxide groups resulting in an overtone of secondary hydroxyl end groups (RTB series). Adjusting the sizes of both chains allows the synthesis of materials with great flexibility in chemical and physical properties. This results in a wide range of applications such as antifoams, plasticizers, lubricants, detergents and cleaners. Block Copolymer TB8521 Login CONTACT > EO/PO block copolymers belong to a versatile range of non-ionic, low-foaming surfactants of ethylene oxide and propylene oxide. The composition can be a PO block flanked by polyethylene oxide chains, generating two primary hydroxyl groups (TB series); or a reversed structure, where a central EO block is sandwiched between polypropylene oxide groups resulting in an overtone of secondary hydroxyl end groups (RTB series). Adjusting the sizes of both chains allows the synthesis of materials with great flexibility in chemical and physical properties. This results in a wide range of applications such as antifoams, plasticizers, lubricants, detergents and cleaners. INEOX 12RHB275 Login CONTACT > The polyalkylene glycols (PAGs) produced by INEOS Oxide include a wide range of linear homopolymers and random copolymers of ethylene oxide and/or propylene oxide. Applications include, but are not limited to; chemical intermediates, cosmetics and toiletries, lubricants, hydraulic and metal working fluids, solvents, .... INEOX 50HB260 Login CONTACT > The polyalkylene glycols (PAGs) produced by INEOS Oxide include a wide range of linear homopolymers and random copolymers of ethylene oxide and/or propylene oxide. Applications include, but are not limited to; chemical intermediates, cosmetics and toiletries, lubricants, hydraulic and metal working fluids, solvents, .... INEOX 50HB400 Login CONTACT > The polyalkylene glycols (PAGs) produced by INEOS Oxide include a wide range of linear homopolymers and random copolymers of ethylene oxide and/or propylene oxide. Applications include, but are not limited to; chemical intermediates, cosmetics and toiletries, lubricants, hydraulic and metal working fluids, solvents, .... INEOX 50HB5100 Login CONTACT > The polyalkylene glycols (PAGs) produced by INEOS Oxide include a wide range of linear homopolymers and random copolymers of ethylene oxide and/or propylene oxide. Applications include, but are not limited to; chemical intermediates, cosmetics and toiletries, lubricants, hydraulic and metal working fluids, solvents, .... INEOX 50HB660 Login CONTACT > The polyalkylene glycols (PAGs) produced by INEOS Oxide include a wide range of linear homopolymers and random copolymers of ethylene oxide and/or propylene oxide. Applications include, but are not limited to; chemical intermediates, cosmetics and toiletries, lubricants, hydraulic and metal working fluids, solvents, .... INEOX LB1715 Login CONTACT > The polyalkylene glycols (PAGs) produced by INEOS Oxide include a wide range of linear homopolymers and random copolymers of ethylene oxide and/or propylene oxide. Applications include, but are not limited to; chemical intermediates, cosmetics and toiletries, lubricants, hydraulic and metal working fluids, solvents, .... INEOX LB285 Login CONTACT > The polyalkylene glycols (PAGs) produced by INEOS Oxide include a wide range of linear homopolymers and random copolymers of ethylene oxide and/or propylene oxide. Applications include, but are not limited to; chemical intermediates, cosmetics and toiletries, lubricants, hydraulic and metal working fluids, solvents, .... INEOX LB385 Login CONTACT > The polyalkylene glycols (PAGs) produced by INEOS Oxide include a wide range of linear homopolymers and random copolymers of ethylene oxide and/or propylene oxide. Applications include, but are not limited to; chemical intermediates, cosmetics and toiletries, lubricants, hydraulic and metal working fluids, solvents, .... INEOX LB525 Login CONTACT > The polyalkylene glycols (PAGs) produced by INEOS Oxide include a wide range of linear homopolymers and random copolymers of ethylene oxide and/or propylene oxide. Applications include, but are not limited to; chemical intermediates, cosmetics and toiletries, lubricants, hydraulic and metal working fluids, solvents, .... INEOX LB625 Login CONTACT > The polyalkylene glycols (PAGs) produced by INEOS Oxide include a wide range of linear homopolymers and random copolymers of ethylene oxide and/or propylene oxide. Applications include, but are not limited to; chemical intermediates, cosmetics and toiletries, lubricants, hydraulic and metal working fluids, solvents, .... INEOX LB65 Login CONTACT > The polyalkylene glycols (PAGs) produced by INEOS Oxide include a wide range of linear homopolymers and random copolymers of ethylene oxide and/or propylene oxide. Applications include, but are not limited to; chemical intermediates, cosmetics and toiletries, lubricants, hydraulic and metal working fluids, solvents, .... INEOX LB825 Login CONTACT > The polyalkylene glycols (PAGs) produced by INEOS Oxide include a wide range of linear homopolymers and random copolymers of ethylene oxide and/or propylene oxide. Applications include, but are not limited to; chemical intermediates, cosmetics and toiletries, lubricants, hydraulic and metal working fluids, solvents, .... Polyethylene Glycol 1000, Pharmaceutical Grade Login CONTACT > INEOS Oxide's wide range of polyethylene glycols also includes several pharmaceutical grades. These grades have the same propeties as the corresponding standard grades but have a higher purity and quality making them suited for use in demanding pharmaceutical applications. In the European and Japanese Pharmacopoeia these PEGs are named Macrogols. Polyethylene Glycol 1000, Polyurethane Grade Login CONTACT > Polyethylene glycols are linear homopolymers of ethylene oxide. They are available in average molecular weights ranging from 200 to 8000. All PEGs are designated by a number indicating the average molecular weight. PEG 200, 300 and 400 are clear, viscous liquids at room temperature, PEG 600 and 1000 are liquids above 40 °C. PEG 1500, 3350, 4000, 6000 and 8000 are white waxy solids and are supplied as flakes. Some grades may also be supplied as molten products. They are used in a wide range of industrial sectors and applications including construction, chemicals, textiles, detergents and so on. Based on the amount of residual catalyst they are further divided into several grades. Polyethylene Glycol 1000, Standard Grade Login CONTACT > Polyethylene glycols are linear homopolymers of ethylene oxide. They are available in average molecular weights ranging from 200 to 8000. All PEGs are designated by a number indicating the average molecular weight. PEG 200, 300 and 400 are clear, viscous liquids at room temperature, PEG 600 and 1000 are liquids above 40 °C. PEG 1500, 3350, 4000, 6000 and 8000 are white waxy solids and are supplied as flakes. Some grades may also be supplied as molten products. They are used in a wide range of industrial sectors and applications including construction, chemicals, textiles, detergents and so on. Based on the amount of residual catalyst they are further divided into several grades. Polyethylene Glycol 10000, Pharmaceutical Grade Login CONTACT > INEOS Oxide's wide range of polyethylene glycols also includes several pharmaceutical grades. These grades have the same propeties as the corresponding standard grades but have a higher purity and quality making them suited for use in demanding pharmaceutical applications. In the European and Japanese Pharmacopoeia these PEGs are named Macrogols. Polyethylene Glycol 1500, Pharmaceutical Grade Login CONTACT > INEOS Oxide's wide range of polyethylene glycols also includes several pharmaceutical grades. These grades have the same propeties as the corresponding standard grades but have a higher purity and quality making them suited for use in demanding pharmaceutical applications. In the European and Japanese Pharmacopoeia these PEGs are named Macrogols. Polyethylene Glycol 1500, Polyurethane Grade Login CONTACT > INEOS Oxide's wide range of polyethylene glycols also includes several pharmaceutical grades. These grades have the same propeties as the corresponding standard grades but have a higher purity and quality making them suited for use in demanding pharmaceutical applications. In the European and Japanese Pharmacopoeia these PEGs are named Macrogols. Polyethylene Glycol 1500, Standard Grade Login CONTACT > Polyethylene glycols are linear homopolymers of ethylene oxide. They are available in average molecular weights ranging from 200 to 8000. All PEGs are designated by a number indicating the average molecular weight. PEG 200, 300 and 400 are clear, viscous liquids at room temperature, PEG 600 and 1000 are liquids above 40 °C. PEG 1500, 3350, 4000, 6000 and 8000 are white waxy solids and are supplied as flakes. Some grades may also be supplied as molten products. They are used in a wide range of industrial sectors and applications including construction, chemicals, textiles, detergents and so on. Based on the amount of residual catalyst they are further divided into several grades. Polyethylene Glycol 200, Standard Grade Login CONTACT > Polyethylene glycols are linear homopolymers of ethylene oxide. They are available in average molecular weights ranging from 200 to 8000. All PEGs are designated by a number indicating the average molecular weight. PEG 200, 300 and 400 are clear, viscous liquids at room temperature, PEG 600 and 1000 are liquids above 40 °C. PEG 1500, 3350, 4000, 6000 and 8000 are white waxy solids and are supplied as flakes. Some grades may also be supplied as molten products. They are used in a wide range of industrial sectors and applications including construction, chemicals, textiles, detergents and so on. Based on the amount of residual catalyst they are further divided into several grades. Polyethylene Glycol 2000, Pharmaceutical Grade Login CONTACT > INEOS Oxide's wide range of polyethylene glycols also includes several pharmaceutical grades. These grades have the same propeties as the corresponding standard grades but have a higher purity and quality making them suited for use in demanding pharmaceutical applications. In the European and Japanese Pharmacopoeia these PEGs are named Macrogols. Polyethylene Glycol 2000, Standard Grade Login CONTACT > Polyethylene glycols are linear homopolymers of ethylene oxide. They are available in average molecular weights ranging from 200 to 8000. All PEGs are designated by a number indicating the average molecular weight. PEG 200, 300 and 400 are clear, viscous liquids at room temperature, PEG 600 and 1000 are liquids above 40 °C. PEG 1500, 3350, 4000, 6000 and 8000 are white waxy solids and are supplied as flakes. Some grades may also be supplied as molten products. They are used in a wide range of industrial sectors and applications including construction, chemicals, textiles, detergents and so on. Based on the amount of residual catalyst they are further divided into several grades. Polyethylene Glycol 205, Pharmaceutical Grade Login CONTACT > INEOS Oxide's wide range of polyethylene glycols also includes several pharmaceutical grades. These grades have the same propeties as the corresponding standard grades but have a higher purity and quality making them suited for use in demanding pharmaceutical applications. In the European and Japanese Pharmacopoeia these PEGs are named Macrogols. Polyethylene Glycol 300, Deashed Pharmaceutical Grade Login CONTACT > INEOS Oxide's wide range of polyethylene glycols also includes several pharmaceutical grades. These grades have the same propeties as the corresponding standard grades but have a higher purity and quality making them suited for use in demanding pharmaceutical applications. In the European and Japanese Pharmacopoeia these PEGs are named Macrogols. Polyethylene Glycol 300, Pharmaceutical Grade Login CONTACT > INEOS Oxide's wide range of polyethylene glycols also includes several pharmaceutical grades. These grades have the same propeties as the corresponding standard grades but have a higher purity and quality making them suited for use in demanding pharmaceutical applications. In the European and Japanese Pharmacopoeia these PEGs are named Macrogols. Polyethylene Glycol 300, Standard Grade Login CONTACT > Polyethylene glycols are linear homopolymers of ethylene oxide. They are available in average molecular weights ranging from 200 to 8000. All PEGs are designated by a number indicating the average molecular weight. PEG 200, 300 and 400 are clear, viscous liquids at room temperature, PEG 600 and 1000 are liquids above 40 °C. PEG 1500, 3350, 4000, 6000 and 8000 are white waxy solids and are supplied as flakes. Some grades may also be supplied as molten products. They are used in a wide range of industrial sectors and applications including construction, chemicals, textiles, detergents and so on. Based on the amount of residual catalyst they are further divided into several grades. Polyethylene Glycol 3350, Pharmaceutical Grade Login CONTACT > INEOS Oxide's wide range of polyethylene glycols also includes several pharmaceutical grades. These grades have the same propeties as the corresponding standard grades but have a higher purity and quality making them suited for use in demanding pharmaceutical applications. In the European and Japanese Pharmacopoeia these PEGs are named Macrogols. Polyethylene Glycol 3350, Standard Grade Login CONTACT > Polyethylene glycols are linear homopolymers of ethylene oxide. They are available in average molecular weights ranging from 200 to 8000. All PEGs are designated by a number indicating the average molecular weight. PEG 200, 300 and 400 are clear, viscous liquids at room temperature, PEG 600 and 1000 are liquids above 40 °C. PEG 1500, 3350, 4000, 6000 and 8000 are white waxy solids and are supplied as flakes. Some grades may also be supplied as molten products. They are used in a wide range of industrial sectors and applications including construction, chemicals, textiles, detergents and so on. Based on the amount of residual catalyst they are further divided into several grades. Polyethylene Glycol 3350XLA, Pharmaceutical Grade Login CONTACT > INEOS Oxide's wide range of polyethylene glycols also includes several pharmaceutical grades. These grades have the same propeties as the corresponding standard grades but have a higher purity and quality making them suited for use in demanding pharmaceutical applications. In the European and Japanese Pharmacopoeia these PEGs are named Macrogols. Polyethylene Glycol 400, Pharmaceutical Grade Login CONTACT > INEOS Oxide's wide range of polyethylene glycols also includes several pharmaceutical grades. These grades have the same propeties as the corresponding standard grades but have a higher purity and quality making them suited for use in demanding pharmaceutical applications. In the European and Japanese Pharmacopoeia these PEGs are named Macrogols. Polyethylene Glycol 400, Standard Grade Login CONTACT > Polyethylene glycols are linear homopolymers of ethylene oxide. They are available in average molecular weights ranging from 200 to 8000. All PEGs are designated by a number indicating the average molecular weight. PEG 200, 300 and 400 are clear, viscous liquids at room temperature, PEG 600 and 1000 are liquids above 40 °C. PEG 1500, 3350, 4000, 6000 and 8000 are white waxy solids and are supplied as flakes. Some grades may also be supplied as molten products. They are used in a wide range of industrial sectors and applications including construction, chemicals, textiles, detergents and so on. Based on the amount of residual catalyst they are further divided into several grades. Polyethylene Glycol 4000, Pharmaceutical Grade Login CONTACT > INEOS Oxide's wide range of polyethylene glycols also includes several pharmaceutical grades. These grades have the same propeties as the corresponding standard grades but have a higher purity and quality making them suited for use in demanding pharmaceutical applications. In the European and Japanese Pharmacopoeia these PEGs are named Macrogols. Polyethylene Glycol 4000, Standard Grade Login CONTACT > Polyethylene glycols are linear homopolymers of ethylene oxide. They are available in average molecular weights ranging from 200 to 8000. All PEGs are designated by a number indicating the average molecular weight. PEG 200, 300 and 400 are clear, viscous liquids at room temperature, PEG 600 and 1000 are liquids above 40 °C. PEG 1500, 3350, 4000, 6000 and 8000 are white waxy solids and are supplied as flakes. Some grades may also be supplied as molten products. They are used in a wide range of industrial sectors and applications including construction, chemicals, textiles, detergents and so on. Based on the amount of residual catalyst they are further divided into several grades. Polyethylene Glycol 5500, Pharmaceutical Grade Login CONTACT > INEOS Oxide's wide range of polyethylene glycols also includes several pharmaceutical grades. These grades have the same propeties as the corresponding standard grades but have a higher purity and quality making them suited for use in demanding pharmaceutical applications. In the European and Japanese Pharmacopoeia these PEGs are named Macrogols. Polyethylene Glycol 600, Deashed Grade Login CONTACT > Polyethylene glycols are linear homopolymers of ethylene oxide. They are available in average molecular weights ranging from 200 to 8000. All PEGs are designated by a number indicating the average molecular weight. PEG 200, 300 and 400 are clear, viscous liquids at room temperature, PEG 600 and 1000 are liquids above 40 °C. PEG 1500, 3350, 4000, 6000 and 8000 are white waxy solids and are supplied as flakes. Some grades may also be supplied as molten products. They are used in a wide range of industrial sectors and applications including construction, chemicals, textiles, detergents and so on. Based on the amount of residual catalyst they are further divided into several grades. Polyethylene Glycol 600, Pharmaceutical Grade Login CONTACT > INEOS Oxide's wide range of polyethylene glycols also includes several pharmaceutical grades. These grades have the same propeties as the corresponding standard grades but have a higher purity and quality making them suited for use in demanding pharmaceutical applications. In the European and Japanese Pharmacopoeia these PEGs are named Macrogols. Polyethylene Glycol 600, Standard Grade Login CONTACT > Polyethylene glycols are linear homopolymers of ethylene oxide. They are available in average molecular weights ranging from 200 to 8000. All PEGs are designated by a number indicating the average molecular weight. PEG 200, 300 and 400 are clear, viscous liquids at room temperature, PEG 600 and 1000 are liquids above 40 °C. PEG 1500, 3350, 4000, 6000 and 8000 are white waxy solids and are supplied as flakes. Some grades may also be supplied as molten products. They are used in a wide range of industrial sectors and applications including construction, chemicals, textiles, detergents and so on. Based on the amount of residual catalyst they are further divided into several grades. Polyethylene Glycol 6000, Pharmaceutical Grade Login CONTACT > INEOS Oxide's wide range of polyethylene glycols also includes several pharmaceutical grades. These grades have the same propeties as the corresponding standard grades but have a higher purity and quality making them suited for use in demanding pharmaceutical applications. In the European and Japanese Pharmacopoeia these PEGs are named Macrogols. Polyethylene Glycol 6000, Standard Grade Login CONTACT > Polyethylene glycols are linear homopolymers of ethylene oxide. They are available in average molecular weights ranging from 200 to 8000. All PEGs are designated by a number indicating the average molecular weight. PEG 200, 300 and 400 are clear, viscous liquids at room temperature, PEG 600 and 1000 are liquids above 40 °C. PEG 1500, 3350, 4000, 6000 and 8000 are white waxy solids and are supplied as flakes. Some grades may also be supplied as molten products. They are used in a wide range of industrial sectors and applications including construction, chemicals, textiles, detergents and so on. Based on the amount of residual catalyst they are further divided into several grades. Polyethylene Glycol 800, Pharmaceutical Grade Login CONTACT > INEOS Oxide's wide range of polyethylene glycols also includes several pharmaceutical grades. These grades have the same propeties as the corresponding standard grades but have a higher purity and quality making them suited for use in demanding pharmaceutical applications. In the European and Japanese Pharmacopoeia these PEGs are named Macrogols. Polyethylene Glycol 800, Standard Grade Login CONTACT > Polyethylene glycols are linear homopolymers of ethylene oxide. They are available in average molecular weights ranging from 200 to 8000. All PEGs are designated by a number indicating the average molecular weight. PEG 200, 300 and 400 are clear, viscous liquids at room temperature, PEG 600 and 1000 are liquids above 40 °C. PEG 1500, 3350, 4000, 6000 and 8000 are white waxy solids and are supplied as flakes. Some grades may also be supplied as molten products. They are used in a wide range of industrial sectors and applications including construction, chemicals, textiles, detergents and so on. Based on the amount of residual catalyst they are further divided into several grades. Polyethylene Glycol 8000, Pharmaceutical Grade Login CONTACT > INEOS Oxide's wide range of polyethylene glycols also includes several pharmaceutical grades. These grades have the same propeties as the corresponding standard grades but have a higher purity and quality making them suited for use in demanding pharmaceutical applications. In the European and Japanese Pharmacopoeia these PEGs are named Macrogols. Polyethylene Glycol 8000, Standard Grade Login CONTACT > Polyethylene glycols are linear homopolymers of ethylene oxide. They are available in average molecular weights ranging from 200 to 8000. All PEGs are designated by a number indicating the average molecular weight. PEG 200, 300 and 400 are clear, viscous liquids at room temperature, PEG 600 and 1000 are liquids above 40 °C. PEG 1500, 3350, 4000, 6000 and 8000 are white waxy solids and are supplied as flakes. Some grades may also be supplied as molten products. They are used in a wide range of industrial sectors and applications including construction, chemicals, textiles, detergents and so on. Based on the amount of residual catalyst they are further divided into several grades. Polyethylene Glycol 8000XLA, Pharmaceutical Grade Login CONTACT > INEOS Oxide's wide range of polyethylene glycols also includes several pharmaceutical grades. These grades have the same propeties as the corresponding standard grades but have a higher purity and quality making them suited for use in demanding pharmaceutical applications. In the European and Japanese Pharmacopoeia these PEGs are named Macrogols. Polypropylene Glycol 1200 Login CONTACT > Polypropylene glycols are linear homopolymers of propylene oxide and are available in average molecular weights ranging from 400 to 4000. Applications include antifoams, lubricants and heat transfer fluids. Polypropylene Glycol 2000 Login CONTACT > Polypropylene glycols are linear homopolymers of propylene oxide and are available in average molecular weights ranging from 400 to 4000. Applications include antifoams, lubricants and heat transfer fluids. Polypropylene Glycol 400 Login CONTACT > Polypropylene glycols are linear homopolymers of propylene oxide and are available in average molecular weights ranging from 400 to 4000. Applications include antifoams, lubricants and heat transfer fluids. Polypropylene Glycol 4000 Login CONTACT > Polypropylene glycols are linear homopolymers of propylene oxide and are available in average molecular weights ranging from 400 to 4000. Applications include antifoams, lubricants and heat transfer fluids. Polypropylene Glycol 600 Login CONTACT > Polypropylene glycols are linear homopolymers of propylene oxide and are available in average molecular weights ranging from 400 to 4000. Applications include antifoams, lubricants and heat transfer fluids. Rapeseed methylester ethoxylate 7 Login CONTACT > The fatty acid methyl ester ethoxylates produced by INEOS Oxide are obtained by adding ethylene oxide to fatty acid methyl esters (e.g. Rapeseed methyl ester). These products are typically used as non-ionic surfactants in detergents for cleaning applications and in emulsifiers. Softanol 120 Login CONTACT > Softanol® secondary alcohol ethoxylates are non-ionic surfactants which are obtained by the addition of ethylene oxide to linear secondary alcohols having a C12-C14 alkyl chain. These products have various applications in industries such as paper & pulp, textile and pesticides. Some grades have special applications in cosmetics. Softanol 150 Login CONTACT > Softanol® secondary alcohol ethoxylates are non-ionic surfactants which are obtained by the addition of ethylene oxide to linear secondary alcohols having a C12-C14 alkyl chain. These products have various applications in industries such as paper & pulp, textile and pesticides. Some grades have special applications in cosmetics. Softanol 200 Login CONTACT > Softanol® secondary alcohol ethoxylates are non-ionic surfactants which are obtained by the addition of ethylene oxide to linear secondary alcohols having a C12-C14 alkyl chain. These products have various applications in industries such as paper & pulp, textile and pesticides. Some grades have special applications in cosmetics. Softanol 30 Login CONTACT > Softanol® secondary alcohol ethoxylates are non-ionic surfactants which are obtained by the addition of ethylene oxide to linear secondary alcohols having a C12-C14 alkyl chain. These products have various applications in industries such as paper & pulp, textile and pesticides. Some grades have special applications in cosmetics. Softanol 300 Login CONTACT > Softanol® secondary alcohol ethoxylates are non-ionic surfactants which are obtained by the addition of ethylene oxide to linear secondary alcohols having a C12-C14 alkyl chain. These products have various applications in industries such as paper & pulp, textile and pesticides. Some grades have special applications in cosmetics. Softanol 400 Login CONTACT > Softanol® secondary alcohol ethoxylates are non-ionic surfactants which are obtained by the addition of ethylene oxide to linear secondary alcohols having a C12-C14 alkyl chain. These products have various applications in industries such as paper & pulp, textile and pesticides. Some grades have special applications in cosmetics. Softanol 50 Login CONTACT > Softanol® secondary alcohol ethoxylates are non-ionic surfactants which are obtained by the addition of ethylene oxide to linear secondary alcohols having a C12-C14 alkyl chain. These products have various applications in industries such as paper & pulp, textile and pesticides. Some grades have special applications in cosmetics. Softanol 50, Cosmetic Grade Login CONTACT > Softanol® secondary alcohol ethoxylates are non-ionic surfactants which are obtained by the addition of ethylene oxide to linear secondary alcohols having a C12-C14 alkyl chain. These products have various applications in industries such as paper & pulp, textile and pesticides. Some grades have special applications in cosmetics. Softanol 70 Login CONTACT > Softanol® secondary alcohol ethoxylates are non-ionic surfactants which are obtained by the addition of ethylene oxide to linear secondary alcohols having a C12-C14 alkyl chain. These products have various applications in industries such as paper & pulp, textile and pesticides. Some grades have special applications in cosmetics. Softanol 70, Cosmetic Grade Login CONTACT > Softanol® secondary alcohol ethoxylates are non-ionic surfactants which are obtained by the addition of ethylene oxide to linear secondary alcohols having a C12-C14 alkyl chain. These products have various applications in industries such as paper & pulp, textile and pesticides. Some grades have special applications in cosmetics. Softanol 90 Login CONTACT > Softanol® secondary alcohol ethoxylates are non-ionic surfactants which are obtained by the addition of ethylene oxide to linear secondary alcohols having a C12-C14 alkyl chain. These products have various applications in industries such as paper & pulp, textile and pesticides. Some grades have special applications in cosmetics. Solvent CSI40S Login CONTACT > The polyalkylene glycols (PAGs) produced by INEOS Oxide include a wide range of linear homopolymers and random copolymers of ethylene oxide and/or propylene oxide. Applications include, but are not limited to; chemical intermediates, cosmetics and toiletries, lubricants, hydraulic and metal working fluids, solvents, .... TC 3514 Login CONTACT > EO/PO block copolymers belong to a versatile range of non-ionic, low-foaming surfactants of ethylene oxide and propylene oxide. The composition can be a PO block flanked by polyethylene oxide chains, generating two primary hydroxyl groups (TB series); or a reversed structure, where a central EO block is sandwiched between polypropylene oxide groups resulting in an overtone of secondary hydroxyl end groups (RTB series). Adjusting the sizes of both chains allows the synthesis of materials with great flexibility in chemical and physical properties. This results in a wide range of applications such as antifoams, plasticizers, lubricants, detergents and cleaners. TC 3517 Login CONTACT > EO/PO block copolymers belong to a versatile range of non-ionic, low-foaming surfactants of ethylene oxide and propylene oxide. The composition can be a PO block flanked by polyethylene oxide chains, generating two primary hydroxyl groups (TB series); or a reversed structure, where a central EO block is sandwiched between polypropylene oxide groups resulting in an overtone of secondary hydroxyl end groups (RTB series). Adjusting the sizes of both chains allows the synthesis of materials with great flexibility in chemical and physical properties. This results in a wide range of applications such as antifoams, plasticizers, lubricants, detergents and cleaners. -
MaterialEthanolaminesBrandBusinessINEOS OxideGrades
GRADE MORE CONTACT APPLICATIONS Alkanolamine 5503 (PEA) Login CONTACT > Alkanolamine 5503 (or PEA) is an ethanolamine with a typical application in cement and concrete additives. Diethanolamine Login CONTACT > Ethanolamines are one of the most versatile members of the EO derivatives family. They are bifunctional molecules containing both amine and alcohol functional groups and are therefore capable of undergoing reactions at both groups. Many of their industrial applications rely on these features. Typical applications include agrochemicals, chemical intermediates, corrosion inhibitors, cosmetics and personal care products, gas treatment, pharmaceuticals, .... . Monoethanolamine Login CONTACT > Ethanolamines are one of the most versatile members of the EO derivatives family. They are bifunctional molecules containing both amine and alcohol functional groups and are therefore capable of undergoing reactions at both groups. Many of their industrial applications rely on these features. Typical applications include agrochemicals, chemical intermediates, corrosion inhibitors, cosmetics and personal care products, gas treatment, pharmaceuticals, .... . Triethanolamine 85 Login CONTACT > Triethanolamine 85 is a mixture of 85% TEA and 15% DEA with applications similar to those of the pure ethanolamines. Triethanolamine 99 (TEA99) Login CONTACT > Ethanolamines are one of the most versatile members of the EO derivatives family. They are bifunctional molecules containing both amine and alcohol functional groups and are therefore capable of undergoing reactions at both groups. Many of their industrial applications rely on these features. Typical applications include agrochemicals, chemical intermediates, corrosion inhibitors, cosmetics and personal care products, gas treatment, pharmaceuticals, .... . -
MaterialEthylene Oxide, EO Glycols & AntifreezeBrandBusinessINEOS OxideGrades
GRADE MORE CONTACT APPLICATIONS Monoethylene Glycol, GTI Grade Login CONTACT > MEG TGI grade 's typical applications are situated in the automtive and lubricants sector. Triethylene/Tetraethylene Glycol Mixture TEG/TETRA Login CONTACT > Applications of TEG TETRA include lubricants, plasticizer and polyester resins. -
MaterialGlycol Ethers & Glycol Ether AcetatesBrandBusinessINEOS OxideGrades
GRADE MORE CONTACT APPLICATIONS Butyl Diglycol Acetate Login CONTACT > Glycol ethers acetates are versatile, oxygenated solvents which are primarily used in paints, coatings and inks formulations. They are also widely used in sealants and adhesives, in pharmaceutical applications, in the textile industry, in cleaning formulations and as extraction solvents. Butyl Diglycolether Login CONTACT > Not only is BDGE one of the main raw materials for the production of butyl diglycol acetate, it's also vital in paints, coatings, plasiticizers and many other products and applications. Butyl Glycol Acetate Login CONTACT > Glycol ethers acetates are versatile, oxygenated solvents which are primarily used in paints, coatings and inks formulations. They are also widely used in sealants and adhesives, in pharmaceutical applications, in the textile industry, in cleaning formulations and as extraction solvents. Butyl Triglycolether Mixture (Solvent 14) Login CONTACT > BTGE mix has a wide range of applications and can be found in cleaning agents, brake fluids, printing inks, .... Drilling Fluid Additive DCP208 Login CONTACT > DCP 208's main application is it's usage as a drilling fluid additive. When added to brine muds or polymer muds at a concentration of 3-5 % it gives excellent shale control performance and increased cutting hardness, and produces marked decreases in overall mud dilution rates. Muds containing DCP208 also show significant decreases in friction coefficient, filter cake thickness, and fluid loss. Ethoxypropanol Login CONTACT > Typical applications of EP containing endproducts include adhesives, paints, inks and coatings. Ethoxypropyl Acetate Login CONTACT > Glycol ethers acetates are versatile, oxygenated solvents which are primarily used in paints, coatings and inks formulations. They are also widely used in sealants and adhesives, in pharmaceutical applications, in the textile industry, in cleaning formulations and as extraction solvents. Ethyl Diglycolether 99,0% (Industrial Grade) Login CONTACT > EDGE and ETGE are used in various applications ranging from paints, inks, solvents to cosmetics and other specialty products. Ethyl Diglycolether 99,5% (Cosmetic Grade) Login CONTACT > EDGE and ETGE are used in various applications ranging from paints, inks, solvents to cosmetics and other specialty products. Ethyl Triglycolether Login CONTACT > EDGE and ETGE are used in various applications ranging from paints, inks, solvents to cosmetics and other specialty products. Isopropyl Glycolether HP Login CONTACT > IPGE High Purity typically has similar applications as standard IPGE but with extra demands with regards to purity. Furthermore it is also used in the manufacture of pharmaceuticals. Methyl Diglycolether Login CONTACT > Typical applications of MDGE are situated in the paints, inks and coatings sector. It's also used as a solvent in the printing and dyeing of textile fibers and fabrics. -
MaterialOxo-alcoholsBrandBusinessINEOS Oxide
-
MaterialOxo-productsBrandBusinessINEOS Oxide
-
MaterialPropylene Oxide & PO GlycolsBrandBusinessINEOS OxideGrades
GRADE MORE CONTACT APPLICATIONS Monopropylene Glycol HP Grade Login CONTACT > Monopropyleneglycol high purity grade is used in aircraft deicers and hydraulic fluids. Other applications include antifreeze, detergents, and lacquers and adhesives. Propylene Oxide Login CONTACT > Propylene oxide is a very reactive molecule which is mainly used for the production of other important chemicals like polyether polyols, propylene glycols and alkoxylates. These end up in a wide range of applications such as polyurethanes, industrial solvents, synthetic lubricants and textile surfactants.
INEOS Pigments
-
MaterialTitanium DioxideBrandRCLBusinessINEOS PigmentsGrades
GRADE TECH
DATA
SHEETSDS CONTACT APPLICATIONS RCL188 TDS SDS CONTACT > High temperature, thin filmsm Color concentrate, Polyolefins, Styrenics, Engineering polymers, Multi-layer structures, BOPP, BOPET, Injection and blow molding, Membranes and sheets, PVC pipe RCL4 TDS SDS CONTACT > Custom color concentrate,Polystyrene, Polyolefins, ABS, Flexible PVC, Vinyl siding substrate layer, Exterior non-durable white applications, Plastisols RCL595 Plastics TDS SDS CONTACT > Plastics applications, PVC compounds, PVC plastisols, Flexible PVC, Liquid color systems RCL696 Plastics TDS SDS CONTACT > PVC window and door profiles, PVC siding, fencing and decking, PVC rainwater goods, PVC sheets and membranes for exterior applications, PVC pipe, fittings and conduit, Cool roof membrane, Agricultural film RCL9 TDS SDS CONTACT > General industrial coatings, Baking enamels and automotive E-coat systems, Water and solvent based can coatings, Roofing granules, Gel Coatings, Powder coatings, Coil coatings, Water and solvent based decorative coatings, Coatings for packaging applications
INEOS Styrolution
-
MaterialABSBrandLustran® StandardBusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Lustran 1152 MORE INFO > Lustran® 1152 resin is a very high-impact extrusion grade of ABS (acrylonitrile butadiene styrene) with a balance of properties not offered by other grades of ABS. It offers superior toughness, particularly for low-temperature applications, and good thermoformability. Lustran 288 MORE INFO > Lustran® 288 is a very high-flow injection molding grade of ABS (acrylonitrile butadiene styrene) with good impact strength and high gloss. It is intended for use in a wide range of applications, particularly in thin-walled components for telecommunications, office equipment, consumer and other office products. Lustran 732 MORE INFO > Lustran® 732 is an extrusion grade resin designed for use in thermoformed refrigerator and freezer liner applications. It is suitable for use with 245fa PU foams. -
MaterialABSBrandLustran® SpecialtiesBusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Lustran 348 2600 19 14 52 MORE INFO > Lustran® 348 resin is an injection molding grade of ABS (Acrylonitrile butadiene styrene) with medium impact strength and good tensile properties. It is especially suitable for medical applications Lustran 446 97 13 44 MORE INFO > Lustran® 446 resin is a high-impact grade of ABS (Acrylonitrile Butadiene Styrene). This automotive injection molding grade provides a good balance of mechanical properties and impact strength for substrate applications. Lustran PG298 98 22 50 MORE INFO > Lustran® PG298 resin is a grade of ABS (acrylonitrile butadiene styrene) for use in automotive and general-purpose applications. It provides a unique combination of flow and rigidity, with increased scratch resistance. -
MaterialABSBrandLustran® High HeatBusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Lustran Elite 1827 2300 103 17 45 MORE INFO > Lustran® Elite 1827 resin is an injection molding grade of ABS (acrylonitrile butadiene styrene) for high-heat applications in the automotive market. It provides high heat resistance, low gloss, toughness, and easy flow for processing molded-in color parts. Lustran Elite 1891 105 17 45 MORE INFO > Lustran® Elite 1891 resin is an injection molding grade of ABS (acrylonitrile butadiene styrene) for high-heat applications in the automotive market. It provides high heat resistance, low gloss, toughness, and easy flow for processing molded-in color parts. -
MaterialABSBrandNovodur®BusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Novodur E401 1900 99 5 32 40 MORE INFO > Novodur® E401 is a high impact extrusion grade with good surface appearance Novodur HD M203FC 2400 99 31 16 46 MORE INFO > Novodur® HD M203FC is an injection molding grade especially suitable for medical applications providing high flowability. Novodur HD M203FC G3 5600 105 16 5 70 MORE INFO > Novodur® HD M203FC G3 is a glass fiber reinforced injection molding ABS grade for medical applications. Novodur M210TF 2450 99 32 16 46 MORE INFO > Novodur® M210TF is medium impact, high gloss injection molding grade designed for toy application. M210TF is in compliance with food contact regulations Novodur SBM-90 2000 90 13 15 40 MORE INFO > Novodur SBM-90 is especially designed for drinking water contact, food contact and other sensitive applications. -
MaterialABSBrandNovodur® High HeatBusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Novodur H950 2600 114 4.5 17 50 MORE INFO > Novodur® H950 is a very high heat injection molding grade with high gloss surface appearance -
MaterialABSBrandTerluran®BusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Terluran GP-22 2300 96 19 22 45 MORE INFO > Terluran® GP-22 is an easy-flow, general purpose injection molding grade with high resistance to impact and heat distortion; intended for a wide range of applications, particularly in the housings sector. Terluran KR2910 MORE INFO > Terluran KR 2910 acrylonitrile/butadiene/styrene copolymer (ABS) is a general purpose, extrusion grade resin with good impact resistance and processing characteristics. Terluran KR 2910 is intended for use as a substrate layer in co-extrusion and profile extrusion applications. -
MaterialABS+PA & ASA+PABrandTerblend®BusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Terblend N NM-21EF 2100 110 70 45 MORE INFO > Terblend® N NM-21EF is a UV-stabilized ABS/PA blend with high impact toughness, excellent flowability and enhanced heat resistance. It is especially suitable for grained automotive interior applications and provides a premium matte appearance. Terblend S SG-02EF 3300 128 10 65 MORE INFO > Terblend® S SG-02EF is an 8% glass fiber reinforced UV-stabilized ASA/PA blend with enhanced rigidity and high flowability. Terblend® S SG-02EF provides highest UV stability among all Terblend® GF grades and its dimensional stability under heat has been furthermore improved compared to grades from the Terblend® N NG-02 family. The grade was developed as solution for automotive interior applications as large speaker grills and unpainted airvent housings, requiring high flow and part dimensional stability at temperatures up to 120°C. The SG-02EF allows easy filling of multi cavity tools and the low gloss grained part surfaces provide excellent scratch and mar resistance. Further advantages are a low (post) shrinkage due to presence of 8% glass fibers and a low emission and odor profile. -
MaterialASA & ASA+PCBrandLuran® SBusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Luran S 747R MORE INFO > Luran® S 747R is a high flow, low gloss extrusion grade with enhanced strength properities. The enhanced flow properties make the product suitable for co-extruded applications Luran S 776S 2200 92 4 30 47 MORE INFO > Luran® S 776S is suitable for injection molding applications. It provides good impact toughness and enables matte surface appearance for extruded sheets. Luran S 776SE 2200 92 4 30 47 MORE INFO > Luran® S 776SE is suitable extrusion applications. It provides good impact toughness and enables matte surface appearance for extruded sheets. Luran S 797S 2000 90 5.5 40 42 MORE INFO > Luran® S 797S is suitable for injection molding applications. It provides the highest impact toughness within the product line. Luran S 797SE 2000 90 5.5 40 42 MORE INFO > Luran® S 797SE is suitable for extrusion applications. It provides the highest impact toughness within the product line. -
MaterialCompositesBrandStyLight®BusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS StyLight Aesthetic S C245-1 MORE INFO > StyLight Aesthetic S C245-1 is a thermoplastic composite based on a modified SAN matrix optimized for (semi)structural aesthetic applications. StyLight is our innovative thermoplastic composite based on styrenic copolymers for lightweight design. This combination of structural stiffness, aesthetics, processability and dimensional stability makes StyLight an excellent so lution for high performance applications. StyLight Aesthetic S G290-1 MORE INFO > StyLight Aesthetic S G-290-1 is a thermoplastic composite based on modified SAN matrix optimized for semi structural aesthetic applications. StyLight is our innovative thermoplastic composite based on styrenic copolymers for lightweight design. This combination of structural stiffness, aesthetics, processability and dimensional stability makes StyLight an excellent solution for high performance applications. -
MaterialCompositesBrand40190045BusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS StyLight Structural S G580-1 MORE INFO > StyLight Structural S G580-1 is a thermoplastic composite based on a modified SAN matrix optimized for structural applications. StyLight is our innovative thermoplastic composite based on styrenic copolymers for lightweight design. This combination of structural stiffness, aesthetics, processability and dimensional stability makes StyLight an excellent solution for high performance applications. StyLight Structural S G600-3 MORE INFO > StyLight Structural S G600-3 is a continuous fiber reinforced thermoplastic composite based on a modified SAN matrix opti- mized for structural applications. StyLight is our innovative continuous fiber reinforced thermoplastic composite based on styrenic copolymers for lightweight design. This combination of structural stiffness, aesthetics, processability and dimensional stability makes StyLight an excellent solution for high performance applications. -
MaterialSANBrandLuran®BusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Luran 388S 3800 107 7 2.5 79 MORE INFO > Luran® 388S is a specialty grade of SAN with enhanced chemical resistance and the highest mechanical strength. It is suitable for injection molding and extrusion applications. -
MaterialSANBrandLuran® High HeatBusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Luran HH-120 3900 120 7 2 79 MORE INFO > Luran® HH-120 is a grade of AMSAN with high heat resistance and improved mechanical strength. It is suitable for injection molding and extrusion applications and can be used as a modifier for high heat ABS and PVC. For TDS and further information about the specialty piano black versions of Luran® HH-120 including INEOS Styrolution’s latest SPF50 UV protection technology please contact the INEOS Styrolution Infopoint. -
MaterialSANBrandLustran®BusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Lustran SAN DN20 3400 103 117 MORE INFO > SAN resin supplied in natural and bead form designed for compounding. Lustran SAN DN50 MORE INFO > SAN resin supplied in natural color for use in compounding applications Lustran SAN DN52 MORE INFO > SAN resin supplied in natural color for use in compounding applications Lustran SAN DN59 3480 102.4 58 MORE INFO > SAN resin supplied in natural color for use in compounding applications Lustran SAN DN77 34 MORE INFO > SAN resin supplied in natural color for use in compounding applications Lustran SAN DN79 20 MORE INFO > SAN resin supplied in natural color for use in compounding applications Lustran SAN DN88 106.3 6.29 MORE INFO > SAN supplied in natural color and bead form for compounding -
MaterialSBCBrandK-Resin®BusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS K-Resin BK10 1500 53 2 25 MORE INFO > K-Resin® BK10 process very well in injection molding, providing good cycle times and design flexibility. Applications range from containers and packaging with living hinges to medical applications, toys, displays, overcaps and hangers. INEOS Styrolution has several grades of K-Resin® SBC tailored for your injection molded needs. K-Resin DK11 1500 52 2 25 MORE INFO > K-Resin® DK11 makes a clear, stiff, very tough, high gloss film suitable for applications such as candy twist wrap, shrink sleeves and overwrap. K-Resin® SBC grades designed for blown film extrusion is DK11. K-Resin DK11E 1500 52 2 25 MORE INFO > K-Resin® DK11E makes a clear, stiff, very tough, high gloss film suitable for applications such as candy twist wrap, shrink sleeves and overwrap. K-Resin® SBC grade designed for blown film extrusion is DK11E. K-Resin KR01 1600 65 2 33 MORE INFO > K-Resin® KR01 process very well in injection molding, providing good cycle times and design flexibility. Applications range from containers and packaging with living hinges to medical applications, toys, displays, overcaps and hangers. INEOS Styrolution has several grades of K-Resin® SBC tailored for your injection molded needs. K-Resin KR03 1500 53 2 25 MORE INFO > K-Resin® KR03 process very well in injection molding, providing good cycle times and design flexibility. Applications range from containers and packaging with living hinges to medical applications, toys, displays, overcaps and hangers. INEOS Styrolution has several grades of K-Resin® SBC tailored for your injection molded needs. K-Resin KR03E 1500 53 2 25 MORE INFO > K-Resin® KR03E process very well in injection molding, providing good cycle times and design flexibility. Applications range from containers and packaging with living hinges to medical applications, toys, displays, overcaps and hangers. INEOS Styrolution has several grades of K-Resin® SBC tailored for your injection molded needs. K-Resin KR05 1500 53 2 25 MORE INFO > K-Resin® KR05 alone or in blends, can be extruded into sheet and thermoformed on conventional equipment at high output rates. The favorable economics of K-Resin® SBC, along with high productivity, have made possible tough clear disposable drinking cups, lids and other packaging applications. INEOS Styrolution has several grades of K-Resin® SBC tailored for your sheet extrusion needs. K-Resin® KR05 will process on most conventional equipment, allowing the molder to run a crystal clear bottle without expensive machine modifications, special molds, different screws, or dryers. K-Resin® SBC are blow molded in a broad range of sizes and shapes, from small pill bottles and medical drainage units, to very tall display bottles. They can also be injection blow molded into extremely high impact bottles with glass-like clarity. K-Resin KR10 MORE INFO > K-Resin® KR10 alone or in blends, can be extruded into sheet and thermoformed on conventional equipment at high output rates. The favorable economics of K-Resin® SBC, along with high productivity, have made possible tough clear disposable drinking cups, lids and other packaging applications. INEOS Styrolution has several grades of K-Resin® SBC tailored for your sheet extrusion needs. K-Resin® KR10 will process on most conventional equipment, allowing the molder to run a crystal clear bottle without expensive machine modifications, special molds, different screws, or dryers. K-Resin® SBC are blow molded in a broad range of sizes and shapes, from small pill bottles and medical drainage units, to very tall display bottles. They can also be injection blow molded into extremely high impact bottles with glass-like clarity. K-Resin KR38 900 50 50 15 MORE INFO > K-Resin® KR38 alone or in blends, can be extruded into sheet and thermoformed on conventional equipment at high output rates. The favorable economics of K-Resin SBC, along with high productivity, have made possible tough clear disposable drinking cups, lids and other packaging applications. INEOS Styrolution has several grades of K-Resin SBC tailored for your sheet extrusion needs. K-Resin KR40 750 40 4 15 MORE INFO > K-Resin® KR40 alone or in blends, can be extruded into sheet and thermoformed on conventional equipment at high output rates. The favorable economics of K-Resin SBC, along with high productivity, have made possible tough clear disposable drinking cups, lids and other packaging applications. INEOS Styrolution has several grades of K-Resin SBC tailored for your sheet extrusion needs. K-Resin KR52 MORE INFO > K-Resin® KR52 makes a clear, stiff, very tough, high gloss film suitable for applications such as candy twist wrap, shrink sleeves and overwrap. K-Resin® KR52 is designed for use in the uniaxial oriented film process for shrink sleeves. K-Resin KR53 MORE INFO > K-Resin® KR53 makes a clear, stiff, very tough, high gloss film suitable for applications such as candy twist wrap, shrink sleeves and overwrap. -
MaterialSBCBrandStyroflex®BusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Styroflex 2G66 LE 120 4 MORE INFO > Styroflex® 2G66 LE is a styrene-butadiene block copolymer (SBC) with the properties of a thermoplastic elastomer (S-TPE) suitable for extrusion (blown and cast film) and for injection molding. Styroflex® 2G66 LE is a grade with reduced residuals to achieve improved VOC levels for demanding applications. It can be used for polymer modification and compatibilization. It is more polar than comparable SBS or SEBS grades and offers a combination of high resilience and toughness with good transparency and process stability. -
MaterialSBCBrandStyrolux®BusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Styrolux 3G55 900 35 85 15 MORE INFO > Styrolux® 3G55 is a clear styrene butadiene copolymer (SBC) used mainly in sheet extrusion and thermoforming applications. It is specifically designed for improved performance in blends with general-purpose polystyrene, providing parts with an excellent balance of toughness, transparency and economics. Because of the tendency of blocking, 3G55 is mainly used in inline thermoforming. 3G55 is difficult to print and decorate since it contains a microcrystalline wax. Styrolux BATCH ASE MORE INFO > Highly effective lubricants in Styrolux® Batch ASE improve the release properties of injection molded parts made from Styrolux® or Styrolux® containing blends (e.g. those with GPPS).Styrolux® Batch ASE further improves the unstacking performance of deep-drawn parts and reduces the mar sensitivity of Styrolux®. The dosing of Styrolux® Batch ASE should not exceed 4 %; in most cases 2 % is already quite sufficient to form a lubricating layer. Styrolux® Batch ASE is based on Styrolux 684D carrier. Styrolux BATCH NB10 MORE INFO > Styrolux® Batch NB 10 contains an extremely active wax system which should be added in an amount of 0.5 % to 2 % if sheet or film blocking issues are encountered with Styrolux or Styrolux/GPPS blends. If the quantity added is too high, difficulties may occur during printing. Styrolux® Batch NB 10 is based on a GPPS-carrier. Styrolux M 1700 60 3 30 MORE INFO > Styrolux® M is a new, clear and rigid styrene-butadiene copolymer (SBC) designed specifically for shrink film applications. Styrolux® has been developed for blending with other SBC components like Styrolux® S, which increases the stiffness of the film and Styrolux® T1, which increases the toughness of the film. Styrolux® M is used to tailor-made the ultimate shrinkage while keeping the mechanical properties. Styrolux S 2900 64 2 MORE INFO > Styrolux® S is a new developmental, clear styrene-butadiene copolymer (SBC) designed specifically for blending with Styrolux® T in order to enable high performance film extrusion and shrink film applications. As Styrolux® S is blended with Styrolux® T it increases the stiffness of the film and improves the storage stability of film reels (reduced natural shrinkage). Styrolux T 1200 46 75 2 25 MORE INFO > Styrolux® T is a new developmental, clear and tough styrene-butadiene copolymer (SBC) designed specifically for high performance film extrusion and shrink film applications. Styrolux® T has been developped for blending with a second SBC component, Styrolux® S, which inceases the stiffness of the film and improves the storage stability of film reels (reduced natural shrinkage). Styrolux T1 1100 48 75 25 MORE INFO > Styrolux® T1 is a new, clear and tough styrene-butadiene copolymer (SBC) designed specifically for high performance film extrusion and shrink film applications. Styrolux® T1 has been developed for blending with a sceond SBC component, Styrolux® S, which increases the stiffness of the film and improves the storage stability of film reels (reduced natural shrinkage). -
MaterialSMMA & MBSBrandNAS®BusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS NAS 21 3300 98 24 1.5 60 MORE INFO > NAS® 21 is a styrene acrylic copolymer that can be used in a variety of applications demanding a strong, stiff water-clear plastic resin with excellent thermal stability. NAS 30 3300 98 30 1.5 60 MORE INFO > NAS® 30 is a styrene acrylic copolymer that can be used in a variety of applications demanding a strong, stiff water-clear plastic resin with excellent thermal stability. NAS 90 3100 90 16 1.5 60 MORE INFO > NAS® 90 is a styrene acrylic copolymer that can be used in a variety of applications demanding a strong, stiff water-clear plastic resin with excellent thermal stability. NAS XC UV 3400 98 24.4 1.4 MORE INFO > NAS XC is a styrene methyl methacrylate copolymer that can be used in a variety of applications demanding a extremely low haze and ultra clarity, also available with an UV package. -
MaterialSMMA & MBSBrandZylar®BusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Zylar 245 2300 78 48 2 37 MORE INFO > Zylar® 245 is a MBS grade that provides practical toughness, good clarity and superior processing characteristics for demanding injection molding applications. Zylar 550 2100 73 55 4 28 MORE INFO > Zylar® 550 is an impact modified styrene acrylic copolymer that provides practical toughness, good clarity and superior processing characteristics for demanding injection molded applications. Zylar 631 2000 77 55 4 36 MORE INFO > Zylar® 631 is an impact modified styrene acrylic copolymer that provides a balance of clarity and toughness, with outstanding strength and rigidity. Zylar 631 also has superior processing characteristics for demanding injection molded application. Zylar 650 2100 72 45 2 26 MORE INFO > Zylar® 650 is an impact modified styrene acrylic copolymer that provides a balance of clarity and toughness, with outstanding strength and rigidity. Zylar® 650 also has superior processing characteristics for demanding injection molded applications. Zylar 960 1640 60 65 16 28 MORE INFO > Zylar® 960 is an impact modified styrene acrylic copolymer that provides toughness equivalent to some grades of polycarbonate, good clarity and superior processing characteristics for demanding injection molded applications. -
MaterialStyrene MonomerBrandEthylbenzeneBusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Ethylbenzene MORE INFO > Ethylebenzene is the pre-cursor to the production of styrene monomer.It is also used in other applications such as fuel blending components and solvents. -
MaterialStyrene MonomerBrandStyrene MonomerBusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Styrene Monomer MORE INFO > Styrene monomer is a basic building block for the production of dispersions, foams and polymers and is the backbone of the INEOS Styrolution portfolio of styrenic polymers. It is used in diverse applications ranging from food containers and packaging materials to cars, boats, computers, and appliances. -
MaterialStyrolution ECOBrandStyrolux® ECOBusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Styrolux ECO M B60 1700 60 3 30 MORE INFO > Styrolux® ECO M B60 is a clear and rigid styrene-butadiene copolymer (SBC) designed specifically for shrink film applications. Styrolux® ECO M B60 has been developed for blending with other SBC components like Styrolux® S, which increases the stiffness of the film and Styrolux® T1, which increases the toughness of the film. Styrolux® ECO M B60 is used to tailor-made the ultimate shrinkage while keeping the mechanical properties.Styrolux® ECO M B60 is a RSB compliant product leading to a 100% substitution of fossil source styrene with an RSB-certified bio-attributed styrene. Over its production lifecycle, Styrolux® ECO M B60 provides 74% greenhouse gas savings compared to a fossil fuel equivalent. RSB Participant code: 2114. Styrolux ECO S B60 2900 64 2 MORE INFO > Styrolux® ECO S B60 is a clear styrene-butadiene copolymer (SBC) designed specifically for blending with Styrolux® T in order to enable high performance film extrusion and shrink film applications. As Styrolux® ECO S B60 is blended with Styrolux® T it increases the stiffness of the film and improves the storage stability of film reels (reduced natural shrinkage).Styrolux® ECO S B60 is a RSB compliant product leading to a 100% substitution of fossil source styrene with an RSB-certified bio-attributed styrene. Over its production lifecycle, Styrolux® ECO S B60 provides 74% greenhouse gas savings compared to a fossil fuel equivalent. RSB Participant code: 2114. Styrolux ECO T B60 1200 46 2 25 MORE INFO > Styrolux® ECO T B60 is a clear and tough styrene-butadiene copolymer (SBC) designed specifically for high performance filmextrusion and shrink film applications. Styrolux® ECO T B60 has been developed for blending with a second SBC component, Styrolux® S, which increases the stiffness of the film and improves the storage stability of film reels (reduced natural shrinkage).Styrolux® ECO T B60 is a RSB compliant product leading to a 100% substitution of fossil source styrene with an RSB-certified bio-attributed styrene. Over its production lifecycle, Styrolux® ECO T B60 provides 74% greenhouse gas savings compared to a fossil fuel equivalent. RSB Participant code: 2114. -
MaterialStyrolution ECOBrandTerluran® ECOBusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Terluran ECO GP-22 MR50 2000 90 22 22 35 MORE INFO > Terluran® ECO GP-22 MR50 is a mechanical post consumer recycling (PCR) grade, with a PCR content of 50% in a standard black or dark grey color. It combines easy-flow, high impact resistance and heat distortion with high quality surface finish; intended for a wide range of applications and visible parts. Terluran ECO GP-22 MR70 2000 90 24 18 36 MORE INFO > Terluran® ECO GP-22 MR70 is a mechanical post consumer recycling (PCR) grade, with a PCR content of 70% in a standard black or dark grey color. It combines easy-flow, high impact resistance and heat distortion with high quality surface finish; intended for a wide range of applications and visible parts. -
MaterialStyrolution PSBrandGPPSBusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Styrolution PS 1200/1201 MORE INFO > Styrolution PS 124N/L 3200 87 50 MORE INFO > Styrolution PS 124N/L is a general purpose polystyrene grade with a good flow characteristic and an improved heat resistance. Styrolution PS 1290/1291 MORE INFO > Styrolution PS 1300/1301 MORE INFO > Styrolution PS 153A 3200 85 35 MORE INFO > Styrolution PS 153A is an antistatic modified, general purpose polystyrene grade with a good flow characteristic. Styrolution PS 153F 3050 101 45 MORE INFO > Styrolution PS 153F is general purpose polystyrene with high heat resistance and good flow properties. Styrolution PS 153F is free of internal lubricants, e.g. zinc stearate. Styrolution PS 156F 3200 101 40 MORE INFO > Styrolution PS 156F is a general purpose polystyrene grade with excellent flow properties, high heat resistance and is zinc stearate free. Styrolution PS 158N/L 3300 101 55 MORE INFO > Styrolution PS 158N/L is a heat resistant, rapid freezing general purpose grade. It is suitable for expanded sheet and film; for blends with high impact polystyrene in heat contact applications; for transparent, impact resistant applications in blends with Styrolux. Styrolution PS 1611 MORE INFO > Styrolution PS 1621 MORE INFO > Styrolution PS 165N/L 3300 89 52 MORE INFO > Styrolution PS 165N/L is a high molecular weight, good flowing grade, often blended with high impact extrusion grades. Styrolution PS 168N/L 3300 101 59 MORE INFO > Styrolution PS 168N/L is a high molecular weight, heat resistant grade with high mechanical strength. It is suitable for physically or chemically expanded extruded sheet. It is also suitable for use as blend component with high impact polystyrene or Styrolux. Styrolution PS 1700 MORE INFO > Styrolution PS 2600/2601 MORE INFO > Styrolution PS 2610 MORE INFO > Styrolution PS 3100/3101 MORE INFO > Styrolution PS 3190/3191 MORE INFO > Styrolution PS 3600/3601 MORE INFO >
INEOS Technologies
-
MaterialEDC CatalystsBrandIVOCBusinessINEOS TechnologiesGrades
PRODUCT SUB MATERIAL TECH
DATA
SHEETSDS APPLICATIONS CONTACT IVOC-FB1 and IVOC-FB2 Oxychlorination Fluid-Bed Catalysts - High temperature TDS SDS The IVOC-FB is a series of promoted copper catalysts on alumina support. They are suited for the Ethylene Oxychlorination in fluid bed reactors operating with air or oxygen and are applicable to Oxychlorination technologies licensed by OxyVinyls, Vinnolit and Arkema. Their specific composition assures as main advantages: high selectivity to EDC, high activities and stable oxychlorination reaction in the whole range of operating conditions. They have been proved in the different technologies since 1999. They can operate in the whole range of temperatures typical of fluid bed processes (from 200° to 260°C). CONTACT > IVOC-FB2*, IVOC-FB4 and IVOC-FB4* Oxychlorination Fluid-Bed Catalysts - Low Temperature TDS SDS The IVOC-FB is a series of promoted copper catalysts on alumina support. They are suited for the Ethylene Oxychlorination in fluid bed reactors operating with air or oxygen and are applicable to Oxychlorination technologies licensed by OxyVinyls, Vinnolit and Arkema. This series represents the new generation of fluid bed catalysts which provides an improved efficiency and a higher stability at the different operating conditions. At standard capacity a saving in ethylene and caustic consumption can be achieved due to very high reactant conversions. The higher activity can also allow an increase of the production rate. They can operate in the normal range of fluid bed processes (from 200 to 260°C) and they offer an excellent fluid-dynamic behavior even at severe conditions. They have been proved in the different Oxychlorination technologies since 2006. CONTACT > -
MaterialPVC AdditivesBrandEVICASBusinessINEOS TechnologiesGrades
PRODUCT SUB MATERIAL TECH
DATA
SHEETSDS APPLICATIONS CONTACT Evicas 90 Build-up Suppressant, Antifouling agent, Coating agents TDS SDS Our world famous EVICAS range of products are used to prevent polymer build-up in reactors and condensers of all the different PVC homopolymer, copolymers and paste/ emulsion manufacturing processes. Main advantages: Extended Reactor Operation (on some reactors for 2000+ batches without cleaning), Increased production capacity (due to decreased time for cleaning), maximum reactor heat transfer as build-up is minimised, safety and environmental improvements as reduced necessity for opening the reactor decreases the potential for a VCM release and minimises employee exposure to VCM, and by reducing lumps and polymer build up, consistent high quality PVC is produced. CONTACT > Evicas 90CS Concentrated Build-up Suppressant, Antifouling agent, Coating agents TDS SDS Our world famous EVICAS range of products are used to prevent polymer build-up in reactors and condensers of all the different PVC homopolymer, copolymers and paste/ emulsion manufacturing processes. No adverse effect on PVC properties when applied evenly and without excess. Could be used for emulsion and copolymer as well as for suspension PVC or other free radical processes. Fully compatible with EVICAS 90, EVICAS 90H and EVICAS CN4. Aids to prevent PVC build-up in troublesome areas eg agitator blades, agitator shaft, internal baffles and condenser tubes. Just a few kg (or less) of EVICAS 90CS needs to be applied during the manual clean. Allows prolonged operation of a reactor, usually for a closed process, before manual cleaning of the reactor is required. Reduces reactor downtime and allows increased PVC productivity per annum. Maximises reactor heat transfer by minimizing the build up of polymer. Can aid fish eye reduction and lowers foreign matter. CONTACT > Evicas 90H Build-up Suppressant, Antifouling agent, Coating agents TDS SDS Our world famous EVICAS range of products are used to prevent polymer build-up in reactors and condensers of all the different PVC homopolymer, copolymers and paste/ emulsion manufacturing processes. Main advantages: Extended Reactor Operation (on some reactors for 2000+ batches without cleaning), Increased production capacity (due to decreased time for cleaning), maximum reactor heat transfer as build-up is minimised, safety and environmental improvements as reduced necessity for opening the reactor decreases the potential for a VCM release and minimises employee exposure to VCM, and by reducing lumps and polymer build up, consistent high quality PVC is produced. CONTACT > Evicas CN4 Build-up Suppressant, Antifouling agent, Coating agents TDS SDS Our world famous EVICAS range of products are used to prevent polymer build-up in reactors and condensers of all the different PVC homopolymer, copolymers and paste/ emulsion manufacturing processes. Main advantages: Improved antifouling performance leading to extended reactor operation: the build-up becomes easier to remove because it is more friable. The reduced necessity for opening the reactor also decreases the potential for a VCM release and minimises employee exposure to VCM. As with EVICAS 90 and 90H, EVICAS CN4 is applicable to all types of reactors and reflux condensers. The EVICAS range products maximises reactor’s heat transfer by minimising the build-up of polymer. Product Quality: with EVICAS CN4, an improvement of up to 20% in the colour of the PVC powder has been observed. EVICAS CN4 reduces the possibilities of dark specs in case of non-optimum antifouling application system (e.g. when too much antifouling agent is added or when the product is applied in a highly non-uniform layer). CONTACT > Evicas XL Build-up suppressant TDS SDS Our world famous EVICAS range of products are used to prevent polymer build-up in reactors and condensers of all the different PVC homopolymer, copolymers and paste/ emulsion manufacturing processes. Main advantages: improved antifouling performance leading to extended reactor operation, the build-up becomes easier to remove because it is more friable. The reduced necessity for opening the reactor also decreases the potential for a VCM release and minimises employee exposure to VCM. As with EVICAS 90 and 90H, EVICAS XL can be applied to any reactor and condenser technology. The main feature of EVICAS XL is the ability to adhere very strongly to the reactor internals, eliminating the need of applying the antifouling agent prior to every batch. Furthermore, the increased adhesion reduces the impact of the antifouling agent to the colour and reduces the likelihood of darks specks coming from the antifouling system in case of a non idealised application. CONTACT > -
MaterialPVC AdditivesBrandINOVOLBusinessINEOS TechnologiesGrades
PRODUCT SUB MATERIAL TECH
DATA
SHEETSDS APPLICATIONS CONTACT INOVOL AF12 Antifoam, De-foamer TDS SDS Antifoam or De-foamer - used to reduce foaming that may occur during the de-gassing of slurry inside the reactor, during high-pressure discharge of slurry from a reactor or during the high temperature stripping of PVC slurry or during additive make-up. Minimises carry-over of PVC during stripping or de-gassing. No adverse effect on polymer properties and perfectly suited to suspension PVC. CONTACT > INOVOL FP Secondary Suspending Agent, Porosity enhancer TDS SDS Inovol FP is used in the suspension polymerisation of PVC, mainly to determine morphological parameters such as porosity. Main advantages: Very tight PVC particle size distribution, Improved PVC powder flow, Improved internal morphology of the PVC resin leading to faster VCM desorption kinetics and significantly lower residual VCM content in the polymer. Quick absorption of processing additives. Very efficient to achieve high porosities even at high temperature. Less foaming both in-reactor (with good advantages for condenser operation) and during stripping. Highly efficient secondary – reduced consumption for same porosity target. Improved melt color of the polymer. Strong reduction/ elimination fisheyes/ dispersion problems. Good hot water charge granulation stability. CONTACT > INOVOL PA10 Primary granulating agent TDS SDS Dispersing agents, granulating agents used in the suspension polymerisation of PVC, to determine mainly particle size and size distribution and to ensure suspension stability. A primary suspending agent developed to optimize size control during PVC polymerisation also when subjected to very demanding high productivity conditions: high monomer/water ratios, high condenser heat removal and direct steam injection heat up. INOVOL PA10 is particularly efficient in controlling particle size whilst optimising the apparent density/porosity balance, i.e. it gives high apparent density whilst maintaining a good porosity for optimum VCM removal. CONTACT > INOVOL SA5 Secondary Suspending Agent, Porosity enhancer TDS SDS Inovol SA5 is used in the suspension polymerisation of PVC, mainly to determine morphological parameters such as porosity. Main advantages: Very good internal homogeneity of the PVC, Very good strippability of the resin for high-temperature polymerisations resulting in low residual VCM, Low coarse and fine fractions, Suitable also for copolymers. The product has a high cloud point. Inovol SA5 performs excellently in the production of VA/VC (vinyl acetate - vinyl chloride) copolymers. CONTACT >