Product Finder
INEOS products make a significant contribution to saving life, improving health and enhancing standards of living for people around the world. Our businesses produce the raw materials that are essential in the manufacture of a wide variety of goods, ranging from automotive parts to medical applications, mobile phones to construction.
Showing 173 Results
INEOS Compounds
-
MaterialGranulate CompoundBrandHy-Vin, Evicom, NorvinylBusinessINEOS Compounds
INEOS Nitriles
-
MaterialAcrylonitrileBrandBusinessINEOS NitrilesGrades
PRODUCT SALES SPECS SDS CONTACT APPLICATIONS Acrylonitrile - Export SSS SDS CONTACT > INEOS leads the way in acrylonitrile through industry advocacy, safety training seminars and development of tools to insure this product is properly handled by all who use it. Acrylonitrile-based acrylic fibres, a popular substitute for cotton and wool, are used to make clothing, carpeting and blankets. Rugged and durable, ABS plastic derived from Acrylonitrile is chosen for its toughness and dimensional stability over other engineering resins. Other applications for Acrylonitrile include Nitrile rubber for hoses and gaskets. Acrylonitrile (MHQ) - Europe SSS SDS CONTACT > INEOS leads the way in acrylonitrile through industry advocacy, safety training seminars and development of tools to insure this product is properly handled by all who use it. Acrylonitrile-based acrylic fibres, a popular substitute for cotton and wool, are used to make clothing, carpeting and blankets. Rugged and durable, ABS plastic derived from Acrylonitrile is chosen for its toughness and dimensional stability over other engineering resins. Other applications for Acrylonitrile include Nitrile rubber for hoses and gaskets.
INEOS O & P Europe
-
MaterialICPBrandRecycl-INBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS rPP4013GY3 13
(230°C/2.16 kg)1500 TDS QUICK SDS > REACH > CONTACT > Crates & boxes, pails, containers, housewares. rPP4019 19
(230°C/2.16 kg)1450 TDS QUICK SDS > REACH > CONTACT > Crates & boxes, pails, containers, housewares. rPP4030GY3 30
(230°C/2.16 kg)1400 TDS QUICK SDS > REACH > CONTACT > Crates & boxes, pails, containers, housewares. rPP4050GY3 50
(230°C/2.16 kg)1400 TDS QUICK SDS > REACH > CONTACT > Crates & boxes, pails, containers, housewares.
INEOS O & P USA
-
MaterialPPBrandBusinessINEOS O & P USAGrades
GRADE MFR
(g/10 min)DENSITY
(g/cm³)NOTCHED IZOD IMPACT
(ft-lb/in)TECH
DATA
SHEETSDS REGULATORY
POSITION
STATEMENTCONTACT TYPICAL APPLICATIONS H05H-01 5.6
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Long-term heat aging homopolymer for appliances and automotive H20H-00 20.5
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Long-term heat aging homopolymer for appliances, consumer, housewares, and rigid packaging H35Z-00 35.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Antistated, nucleated, high flow homopolymer for rigid packaging and housewares L10G-00 10.0
(230°C/2.16kg)2.5 TDS SDS RPS CONTACT > General impact grade designed for injection molding applications L12N-00 12.0
(230°C/2.16kg)5.7 TDS SDS RPS CONTACT > High gloss, nucleated impact copolymer for automotive, consumer and housewares applications L12Z-00 12.0
(230°C/2.16kg)2.6 TDS SDS RPS CONTACT > Antistatted and nucleated impact copolymer for housewares, consumer products and toys L12Z-01 12.0
(230°C/2.16kg)3.4 TDS SDS RPS CONTACT > High gloss, nucleated and antistatted impact copolymer for automotive, toys, consumer and housewares applications L34N-00 34.0
(230°C/2.16kg)2.8 TDS SDS RPS CONTACT > Nucleated, low gloss impact copolymer for housewares and consumer products N12N-00 12.0
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Nucleated grade with good stiffness/impact balance for compounding and injection molding applications. N12Z-00 12.0
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Nucleated and antistated impact copolymer designed for injection molding applications. N20G-00 20.0
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Impact copolymer with good stiffness/impact balance for toys andconsumer products N20N-00 20.0
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Nucleated and antistattedimpact copolymer with good stiffness/impact balance for materials handling, toys and consumer products R35C-01 35.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Antistated version of R35C-00 R35C-02 35.0
(230°C/2.16kg)1.1 TDS SDS RPS CONTACT > Clarified and lubricated random copolymer for medium and thin wall molding applications giving a bluish hue of enhanced and distinctive clarity R55C-00 55.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Clarified and antistatic random copolymer for thin wall molding applications requiring very good mold filling capabilities, excellent clarity, fast cycle times and good stiffness-to-impact properties balance R55C-01 55.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Lubricated and antistatic random copolymer designed for high-speed injection molding of medium to thin walled parts requiring excellent clarity, fast cycle times and ease of de-nesting
INEOS Oligomers
-
MaterialSpecialty OligomersBrandBusinessINEOS OligomersGrades
PRODUCT
GRADECARBON
CHAINMOL.
WEIGHT
(Mn)KINEMATIC
VISCOSITYTECH
DATA
SHEETSALES SPECS SDS CONTACT APPLICATIONS Cyclopentane C5 70 TDS SSS SDS CONTACT > Foam blowing agent; reaction medium solvent; aerosol propellant; extraction solvent Cyclopentane 70 C5 TDS SSS SDS CONTACT > Foam blowing agent; reaction medium solvent; aerosol propellant; extraction solvent Cyclopentane 85 C5 TDS SSS SDS CONTACT > Foam blowing agent; reaction medium solvent; aerosol propellant; extraction solvent
INEOS Styrolution
-
MaterialABSBrandLustran® StandardBusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Lustran 256 2200 97 14 12 45 MORE INFO > Lustran® 256 resin is a natural, medium-flow, medium-impact, low-gloss, low-gel extrusion grade of ABS (Acrylonitrile Butadiene Styrene). It is used for blending with other Lustran ABS virgin and regrind materials to optimize cost and performance. Lustran 261 MORE INFO > Lustran® 261 resin is a natural, stiffer-flow, blending grade of ABS (acrylonitrile butadiene styrene). It is designed for use with other high-impact ABS resins for drain, waste, and vent (DWV) pipe and fittings. Lustran 288 MORE INFO > Lustran® 288 is a very high-flow injection molding grade of ABS (acrylonitrile butadiene styrene) with good impact strength and high gloss. It is intended for use in a wide range of applications, particularly in thin-walled components for telecommunications, office equipment, consumer and other office products. Lustran 433 MORE INFO > Lustran® 433 is a general-purpose injection molding grade of ABS (Acrylonitrile Butadiene Styrene). It is a high impact, high-gloss ABS, available only in natural (NR)and black (BK904000). Lustran 448 MORE INFO > Lustran® 448 resin is a high-gloss, high-impact injection molding grade of ABS (acrylonitrile butadiene styrene). In addition to a good balance of physical properties, it provides heat stability and very good moldability. Lustran 448 in Natural color (000000) is listed under NSF 51 for food equipment materials. Lustran 552 2000 96 6 32 40 MORE INFO > Lustran® 552 resin is a medium-gloss, medium-impact extrusion grade of ABS (acrylonitrile butadiene styrene). It provides a good balance between rigidity and impact strength, and has a stiff melt flow suitable for extrusion and thermoforming. Lustran 556 MORE INFO > Lustran® 556 resin is a low-gloss, medium-impact extrusion grade of ABS (acrylonitrile butadiene styrene). It has good melt strength for extrusion and thermoforming, and can be easily coextruded. Lustran 620 MORE INFO > Lustran® 620 is a high modulus, HFC 134a and HCFC 22 resistant extrusion grade resin designed for refrigerator door and food liners. It offers good melt strength and deep draw formability for superiormaterial distribution in large complex parts. Lustran 633 MORE INFO > Lustran® 633 is a general-purpose injection molding grade of ABS (Acrylonitrile Butadiene Styrene). It offers a good balance of physical properties, high gloss, and good moldability. Lustran 732 MORE INFO > Lustran® 732 is an extrusion grade resin designed for use in thermoformed refrigerator and freezer liner applications. It is suitable for use with 245fa PU foams. Lustran 752 MORE INFO > Lustran® 752 resin is a high-gloss, high-impact extrusion grade of ABS (Acrylonitrile Butadiene Styrene) with improved depth of image and gloss in extruded sheet and thermoformed parts. It provides a superior balance between rigidity and impact strength, as well as excellent melt strength for good thermoformability. Lustran E112LG 1600 95 7 11 28 MORE INFO > Lustran® E112LG resin is a low-gloss, medium-impact extrusion grade of ABS (acrylonitrile butadiene styrene). It has good melt strength for extrusion and thermoforming, and can be easily coextruded. It is easy to color with ABS color concentrates. -
MaterialABSBrandLustran® SpecialtiesBusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Lustran 349 MORE INFO > Lustran® 349 is a high-gloss, medium-impact injection molding resin that has been specially formulated for excellent surface lubricity using internal additives. Lustran 446 97 13 44 MORE INFO > Lustran® 446 resin is a high-impact grade of ABS (Acrylonitrile Butadiene Styrene). This automotive injection molding grade provides a good balance of mechanical properties and impact strength for substrate applications. Lustran LGA 95 16 40 MORE INFO > Lustran® LGA resin is a low-gloss grade of ABS (acrylonitrile butadiene styrene). This automotive injection molding grade offers an excellent balance of rigidity, impact strength, and abuse resistance. Lustran LGM MORE INFO > Lustran® LGM is a low-gloss, easy-flow grade of ABS (Acrylonitrile Butadiene Styrene). This general-purpose injection molding grade offers an excellent balance of rigidity, impact strength, and abuse resistance. Lustran PG298 98 22 50 MORE INFO > Lustran® PG298 resin is a grade of ABS (acrylonitrile butadiene styrene) for use in automotive and general-purpose applications. It provides a unique combination of flow and rigidity, with increased scratch resistance. -
MaterialABSBrandLustran® High HeatBusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Lustran Elite 1827 2300 103 17 45 MORE INFO > Lustran® Elite 1827 resin is an injection molding grade of ABS (acrylonitrile butadiene styrene) for high-heat applications in the automotive market. It provides high heat resistance, low gloss, toughness, and easy flow for processing molded-in color parts. Lustran Elite 1891 105 17 45 MORE INFO > Lustran® Elite 1891 resin is an injection molding grade of ABS (acrylonitrile butadiene styrene) for high-heat applications in the automotive market. It provides high heat resistance, low gloss, toughness, and easy flow for processing molded-in color parts. -
MaterialABSBrandNovodur® High HeatBusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Novodur H605 2400 102 26 15 47 MORE INFO > Novodur® H605 is a high heat injection molding grade with enhanced flowability and low emission, i.e. suitable to produce parts which fulfill interior emission requirements of the automotive OEMs.Furthermore, it complies with EU food contact requirements. Novodur H701 2100 105 8 22 41 MORE INFO > Novodur® H701 is an ABS injection molding grade with a good balance of heat resistance, impact strength and flowability. Furthermore, it is of low emission, i.e. suitable to produce parts which fulfill interior emission requirements of the automotive OEMs. Novodur Ultra 4000PG 2400 107 7 23 46 MORE INFO > Novodur® Ultra 4000PG is an injection molding grade especially suitable for electroplating, providing enhanced heat resistance. Novodur Ultra 4140PG 2100 106 9 41 46 MORE INFO > Novodur® Ultra 4140PG is a PC modified plating grade combining high heat resistance and excellent impact strength with the unique surface properties of a Novodur® ABS material. -
MaterialABSBrandNovodur®BusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Novodur M210TF 2450 99 32 16 46 MORE INFO > Novodur® M210TF is medium impact, high gloss injection molding grade designed for toy application. M210TF is in compliance with food contact regulations Novodur P2H-AT 2500 98 37 18 44 MORE INFO > Novodur® P2H-AT is a general purpose injection molding grade providing high flowability and contains an antistatic additive. Novodur P2HGV 5500 105 3 6 MORE INFO > Novodur® P2HGV is a 16.5% glass fiber reinforced injection molding grade which provides high rigidity and enhanced heat resistance. Novodur P2MC 2200 96 25 25 40 MORE INFO > Novodur® P2MC is an injection molding grade especially suitable for electroplating, providing high flowability. NOVODUR P4XF 2400 96 60 14 43 MORE INFO > P4XF is an ABS with very high flowability and at the same time offers an attractive profile of impact and heat resistance. Novodur SBM-90 2000 90 13 15 40 MORE INFO > Novodur SBM-90 is especially designed for drinking water contact, food contact and other sensitive applications. -
MaterialABSBrandTerluran®BusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Terluran EHI-7 MORE INFO > Terluran® EHI-7 is a medium flow, high impact extrusion grade with super high gloss and superior surface aesthetics. Styrolution’s Terluran® EHI-7 is intended for mono or multilayer sheet making it a perfect fit as a substrate for our weatherable Luran® S ASA. Terluran GP-22 2300 96 19 22 45 MORE INFO > Terluran® GP-22 is an easy-flow, general purpose injection molding grade with high resistance to impact and heat distortion; intended for a wide range of applications, particularly in the housings sector. Terluran GP-35 2300 95 34 19 44 MORE INFO > Terluran® GP-35 is high-flow, general purpose injection molding grade with good ductility, intended for moldings with thin walls and/or adverse flow length to wall ratio. Terluran GP-35 White 2300 95 34 19 44 MORE INFO > Terluran® GP-35 White is a new version of Terluran GP-35 containing a primary package of white pigments and UV stabilization. Just as GP-35 this new grade is suitable for self-coloring with the additional benefit to already contain a primary white and UV formulation and thus the product can create significant savings of master batch consumption in light colors. Terluran GP-35 White is a high-flow, general purpose injection molding grade with good ductility, intended for moldings with thin walls and/or adverse flow length to wall ratio. Terluran HI-10 1900 90 5.5 35 38 MORE INFO > Terluran® HI-10 is an medium flow, injection molding grade with very high resistance to impact with excellent heat distortion and suitable for injection molding and extrusion. Terluran KR2910 MORE INFO > Terluran KR 2910 acrylonitrile/butadiene/styrene copolymer (ABS) is a general purpose, extrusion grade resin with good impact resistance and processing characteristics. Terluran KR 2910 is intended for use as a substrate layer in co-extrusion and profile extrusion applications. Terluran SP-6 1900 90 5.5 35 38 MORE INFO > Terluran® SP-6 is a high impact extrusion grade. -
MaterialABS+PA & ASA+PABrandTerblend®BusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Terblend N 3154 2700 105 8 55 MORE INFO > Terblend® N 3154 is an 8% mineral filled ABS/PA blend with good dimensional stability and enhanced rigidity. Terblend N NG-02 UV 3300 108 8 55 MORE INFO > Terblend® N NG-02 UV is an 8% glass fiber reinforced (UV stabilized) ABS/PA blend with enhanced dimensional stability and rigidity. Terblend N NG-02EF 3100 118 11 55 MORE INFO > Terblend® N NG-02 EF is an 8% glass fiber reinforced UV-stabilized ABS/PA blend with enhanced dimensional stability, rigidity and high flowability. Terblend N NG-04 5400 114 8 MORE INFO > Terblend® N NG-04 is a 20% glass fiber reinforced ABS/PA blend with high dimensional stability and rigidity. Terblend N NG-04EF 5300 130 14 MORE INFO > Terblend® N NG-04EF is a 20% glass fiber reinforced UV-stabilized ABS/PA blend with enhanced dimensional stability, rigidity and high flowability Terblend N NM-11 2000 102 65 43 MORE INFO > Terblend® N NM-11 is an ABS/PA blend with excellent impact tougness and good flowability. Terblend N NM-19XP 2000 102 65 43 MORE INFO > Terblend® N NM-19XP is an ABS/PA blend with excellent impact toughness, very good flowability and UV-stabilization. Terblend N NM-21EF 2100 110 70 45 MORE INFO > Terblend® N NM-21EF is a UV-stabilized ABS/PA blend with high impact toughness, excellent flowability and enhanced heat resistance. It is especially suitable for grained automotive interior applications and provides a premium matte appearance. Terblend S NM-31 2100 110 70 50 MORE INFO > Terblend® S is a UV-stabilized ASA/PA blend with high impact strength, easy flow and pronounced color fastness. It is especially suitable for unpainted highly UV-exposed automotive interior parts. Terblend S SG-02EF 3300 128 10 65 MORE INFO > Terblend® S SG-02EF is an 8% glass fiber reinforced UV-stabilized ASA/PA blend with enhanced rigidity and high flowability. Terblend® S SG-02EF provides highest UV stability among all Terblend® GF grades and its dimensional stability under heat has been furthermore improved compared to grades from the Terblend® N NG-02 family. The grade was developed as solution for automotive interior applications as large speaker grills and unpainted airvent housings, requiring high flow and part dimensional stability at temperatures up to 120°C. The SG-02EF allows easy filling of multi cavity tools and the low gloss grained part surfaces provide excellent scratch and mar resistance. Further advantages are a low (post) shrinkage due to presence of 8% glass fibers and a low emission and odor profile. -
MaterialABS+PA & ASA+PABrandTriax®BusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Triax 1120 MORE INFO > Triax 1120 is an ABS (Acrylonitrile Butadiene Styrene) and polyamide alloy for injection molding. Triax 1185 MORE INFO > Triax 1185 is an ABS (Acrylonitrile Butadiene Styrene) polyamide alloy for injection molding. Triax 1315 MORE INFO > Triax 1315 is an ABS (Acrylonitrile Butadiene Styrene) polyamide alloy with glass reinforcement for injection molding -
MaterialASA & ASA+PCBrandLuran® SBusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Luran S 757G 2400 97 25 12 51 MORE INFO > Luran® S 757G provides the best flowability within the product line and is therfore in particular suitable for demanding injection molding geometries. Luran S 757R 2600 98 8 12 56 MORE INFO > Luran® S 757R is a general injection molding grade with enhanced stiffness. Luran S 776S 2200 92 4 30 47 MORE INFO > Luran® S 776S is suitable for injection molding applications. It provides good impact toughness and enables matte surface appearance for extruded sheets. Luran S 776SE 2200 92 4 30 47 MORE INFO > Luran® S 776SE is suitable extrusion applications. It provides good impact toughness and enables matte surface appearance for extruded sheets. Luran S 777K 2300 97 15 17 48 MORE INFO > Luran® S 777K is considered as the standard injection molding grade within the Luran S portfolio offering a well-balanced property profile. Luran S 778T 2500 104 5 15 54 MORE INFO > Luran® S 778T is an injection molding grade with enhanced heat resistance and best chemical resistance among the ASA grades. Luran S 778T G2 3700 106 3.5 5 58 MORE INFO > Luran® S 778T G2 UV is a 8% glass fiber reinforced ASA with enhanced stiffness, heat stability and UV re-sistance. Luran S 778TE 2500 104 5 15 54 MORE INFO > Luran® S 778TE is an extrusion grade with enhanced heat resistance and best chemical resistance among the ASA grades. Luran S 796M 2000 90 9 30 41 MORE INFO > Luran® S 796M is suitable for extrusion and injection molding. It provides a medium flowability and enhanced impact strength. Luran S 797S 2000 90 5.5 40 42 MORE INFO > Luran® S 797S is suitable for injection molding applications. It provides the highest impact toughness within the product line. Luran S 797SE 2000 90 5.5 40 42 MORE INFO > Luran® S 797SE is suitable for extrusion applications. It provides the highest impact toughness within the product line. Luran S KR2858G3 6600 115 5 7 MORE INFO > Luran® S KR2858G3 is a 15% glass fiber reinforced grade offering enhanced heat resistance and superior rigidity. Luran S Q440 MORE INFO > Luran® S Q440 is a low gloss extrusion ASA grade with excellent weatherability. Q440 is especially suited for the building and construction market as a low gloss weatherable cap layer. It is provided with a base loading of TiO2 to help in the coloring of the product with a color concentrate. -
MaterialASA & ASA+PCBrandLuran® SCBusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Luran S KR2861/1C 2300 120 65 53 MORE INFO > Luran® S KR2861/1C is a blend of ASA and PC providing high heat resistance and extraordinary impact strength Luran S KR2864C 2600 120 60 63 MORE INFO > Luran® S KR2864C is a blend of ASA and PC offering high heat resistance, good impact strength and enhanced flowability. -
MaterialCompositesBrandStyLight®BusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS StyLight Aesthetic S C245-1 MORE INFO > StyLight Aesthetic S C245-1 is a thermoplastic composite based on a modified SAN matrix optimized for (semi)structural aesthetic applications. StyLight is our innovative thermoplastic composite based on styrenic copolymers for lightweight design. This combination of structural stiffness, aesthetics, processability and dimensional stability makes StyLight an excellent so lution for high performance applications. StyLight Aesthetic S G290-1 MORE INFO > StyLight Aesthetic S G-290-1 is a thermoplastic composite based on modified SAN matrix optimized for semi structural aesthetic applications. StyLight is our innovative thermoplastic composite based on styrenic copolymers for lightweight design. This combination of structural stiffness, aesthetics, processability and dimensional stability makes StyLight an excellent solution for high performance applications. -
MaterialCompositesBrand40190045BusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS StyLight Structural S G580-1 MORE INFO > StyLight Structural S G580-1 is a thermoplastic composite based on a modified SAN matrix optimized for structural applications. StyLight is our innovative thermoplastic composite based on styrenic copolymers for lightweight design. This combination of structural stiffness, aesthetics, processability and dimensional stability makes StyLight an excellent solution for high performance applications. StyLight Structural S G600-3 MORE INFO > StyLight Structural S G600-3 is a continuous fiber reinforced thermoplastic composite based on a modified SAN matrix opti- mized for structural applications. StyLight is our innovative continuous fiber reinforced thermoplastic composite based on styrenic copolymers for lightweight design. This combination of structural stiffness, aesthetics, processability and dimensional stability makes StyLight an excellent solution for high performance applications. -
MaterialCompositesBrandStyLight® SLBusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Terblend N NG-04EF SL 125 30 12 78 MORE INFO > Terblend® N NG-04EF is a 20% glass fiber Reinforced UV-stabilized ABS/PA blend with enhanced dimensional stability, rigidity and high flowability that was developed to give the best performance as back injection molding material for StyLight thermoplastic composites. -
MaterialMABSBrandTerlux®BusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Terlux 2802 2000 93 2 5 48 MORE INFO > Terlux® 2802 is a standard injection molding grade based on a MABS polymer. Terlux® 2802 offers an unique combination of properties, such as a balanced stiffness/toughness ratio and the high transparency well known in SAN molding compositions. Terlux 2812 1900 87 8 5 42 MORE INFO > Terlux® 2812 is an easy-flowing injection molding grade based on a MABS polymer. Terlux® 2812 offers an unique combination of properties, such as a balanced stiffness/toughness ratio and the high transparency well known in SAN molding compositions. Terlux HD 2802 2000 93 2 5 48 MORE INFO > Terlux® HD 2802 is a standard injection molding grade based on a MABS polymer. Terlux® HD 2802 offers an unique combination of properties, such as a balanced stiffness/toughness ratio and the high transparency well known in SAN molding compositions. Terlux HD 2812 1900 87 8 5 42 MORE INFO > Terlux® HD 2812 is an easy-flowing injection molding grade based on a MABS polymer. Terlux® HD 2812 offers an unique combination of properties, such as a balanced stiffness/toughness ratio and the high transparency well known in SAN molding compositions. Terlux HD 2822 2000 93 2 5 48 MORE INFO > Terlux® HD 2822 is a new standard-injection molding grade based on a MABS polymer. Terlux® HD 2822 offers a well balanced combination of stiffness and toughness and the high transparency well known in SAN molding compositions. -
MaterialSANBrandLuran®BusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Luran 348Q 3600 105 19 1.5 70 MORE INFO > Luran® 348Q is an easy-flow grade of SAN, suitable for moldings with very thin walls and / or adverse flow length to wall ratio. It features excellent transparency and a light intrinsic color. Luran 358N 3700 106 22 2 72 MORE INFO > Luran® 358N is the general purpose easy-flow grade of SAN, suitable for moldings with very thin walls and / or adverse flow length to wall ratio. It features very good transparency and a light intrinsic color. Luran 368R 3700 106 10 2 75 MORE INFO > Luran® 368R is a general purpose grade of SAN with well-balanced properties, suitable for injection molding and extrusion. It features very good transparency, good heat resistance and very good dimensional stability. Luran 388S 3800 107 7 2.5 79 MORE INFO > Luran® 388S is a specialty grade of SAN with enhanced chemical resistance and the highest mechanical strength. It is suitable for injection molding and extrusion applications. Luran VLN MORE INFO > Luran® VLN styrene/acrylonitrile copolymer is a grade of SAN is an injection molding grade with high flow and excellent chemical resistance. This resin is particular suitable for compounding and also ideal as a carrier resin for pigment masterbatches. -
MaterialSANBrandLuran® High HeatBusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Luran HH-120 3900 120 7 2 79 MORE INFO > Luran® HH-120 is a grade of AMSAN with high heat resistance and improved mechanical strength. It is suitable for injection molding and extrusion applications and can be used as a modifier for high heat ABS and PVC. For TDS and further information about the specialty piano black versions of Luran® HH-120 including INEOS Styrolution’s latest SPF50 UV protection technology please contact the INEOS Styrolution Infopoint. -
MaterialSANBrandLustran®BusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Lustran SAN 29 MORE INFO > Lustran® SAN 29 is a transparent styrene acrylonitrile (SAN) polymer with medium flow and high toughness. Lustran SAN 31 MORE INFO > Lustran® SAN 31 is a transparent styrene acrylonitrile (SAN) with high flow and toughness. Lustran SAN 51 MORE INFO > Lustran® SAN 51 is a transparent styrene acrylonirile (SAN) with medium flow and highest toughness. Lustran SAN Sparkle MORE INFO > Lustran® SAN Sparkle is a transparent styrene acrylonirile (SAN) with high flow and toughness and glass-like clarity -
MaterialSBCBrandK-Resin®BusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS K-Resin DK11 1500 52 2 25 MORE INFO > K-Resin® DK11 makes a clear, stiff, very tough, high gloss film suitable for applications such as candy twist wrap, shrink sleeves and overwrap. K-Resin® SBC grades designed for blown film extrusion is DK11. K-Resin DK11E 1500 52 2 25 MORE INFO > K-Resin® DK11E makes a clear, stiff, very tough, high gloss film suitable for applications such as candy twist wrap, shrink sleeves and overwrap. K-Resin® SBC grade designed for blown film extrusion is DK11E. K-Resin KR01 1600 65 2 33 MORE INFO > K-Resin® KR01 process very well in injection molding, providing good cycle times and design flexibility. Applications range from containers and packaging with living hinges to medical applications, toys, displays, overcaps and hangers. INEOS Styrolution has several grades of K-Resin® SBC tailored for your injection molded needs. K-Resin KR03 1500 53 2 25 MORE INFO > K-Resin® KR03 process very well in injection molding, providing good cycle times and design flexibility. Applications range from containers and packaging with living hinges to medical applications, toys, displays, overcaps and hangers. INEOS Styrolution has several grades of K-Resin® SBC tailored for your injection molded needs. K-Resin KR03E 1500 53 2 25 MORE INFO > K-Resin® KR03E process very well in injection molding, providing good cycle times and design flexibility. Applications range from containers and packaging with living hinges to medical applications, toys, displays, overcaps and hangers. INEOS Styrolution has several grades of K-Resin® SBC tailored for your injection molded needs. K-Resin KR05 1500 53 2 25 MORE INFO > K-Resin® KR05 alone or in blends, can be extruded into sheet and thermoformed on conventional equipment at high output rates. The favorable economics of K-Resin® SBC, along with high productivity, have made possible tough clear disposable drinking cups, lids and other packaging applications. INEOS Styrolution has several grades of K-Resin® SBC tailored for your sheet extrusion needs. K-Resin® KR05 will process on most conventional equipment, allowing the molder to run a crystal clear bottle without expensive machine modifications, special molds, different screws, or dryers. K-Resin® SBC are blow molded in a broad range of sizes and shapes, from small pill bottles and medical drainage units, to very tall display bottles. They can also be injection blow molded into extremely high impact bottles with glass-like clarity. K-Resin KR40 750 40 4 15 MORE INFO > K-Resin® KR40 alone or in blends, can be extruded into sheet and thermoformed on conventional equipment at high output rates. The favorable economics of K-Resin SBC, along with high productivity, have made possible tough clear disposable drinking cups, lids and other packaging applications. INEOS Styrolution has several grades of K-Resin SBC tailored for your sheet extrusion needs. K-Resin KR52 MORE INFO > K-Resin® KR52 makes a clear, stiff, very tough, high gloss film suitable for applications such as candy twist wrap, shrink sleeves and overwrap. K-Resin® KR52 is designed for use in the uniaxial oriented film process for shrink sleeves. K-Resin KR53 MORE INFO > K-Resin® KR53 makes a clear, stiff, very tough, high gloss film suitable for applications such as candy twist wrap, shrink sleeves and overwrap. -
MaterialSBCBrandStyroflex®BusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Styroflex 2G66 120 4 MORE INFO > Styroflex® 2G66 is a styrene-butadiene block copolymer (SBC) with the properties of a thermoplastic elastomer (S-TPE) suitable for extrusion (blown and cast film) and for injection molding. Styroflex® 2G66 is also used for polymers modification and compatibilization. It is more polar than comparable SBS or SEBS grades and offers a combination of high resilience and toughness with good transparency and process stability. Styroflex 2G66 LE 120 4 MORE INFO > Styroflex® 2G66 LE is a styrene-butadiene block copolymer (SBC) with the properties of a thermoplastic elastomer (S-TPE) suitable for extrusion (blown and cast film) and for injection molding. Styroflex® 2G66 LE is a grade with reduced residuals to achieve improved VOC levels for demanding applications. It can be used for polymer modification and compatibilization. It is more polar than comparable SBS or SEBS grades and offers a combination of high resilience and toughness with good transparency and process stability. Styroflex 4G80 80 MORE INFO > Styroflex® 4G80 is a styrene butadiene block copolymer (SBC) optimized for extrusion. -
MaterialSBCBrandStyrolux®BusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Styrolux 3G46 1550 51 3 27 MORE INFO > Styrolux® 3G46 is a clear styrene-butadiene copolymer (SBC) developed specifically for sheet- and film extrusion and for thermoformed articles. Styrolux® 3G46 is designed for improved performance in blends with general-purpose polystyrene, providing parts with an excellent balance of transparency and toughness. Styrolux 3G55 900 35 85 15 MORE INFO > Styrolux® 3G55 is a clear styrene butadiene copolymer (SBC) used mainly in sheet extrusion and thermoforming applications. It is specifically designed for improved performance in blends with general-purpose polystyrene, providing parts with an excellent balance of toughness, transparency and economics. Because of the tendency of blocking, 3G55 is mainly used in inline thermoforming. 3G55 is difficult to print and decorate since it contains a microcrystalline wax. Styrolux 656C 1800 63 2 35 MORE INFO > Styrolux® 656C is a clear styrene-butadiene copolymer (SBC) with enhanced flow properties. It is used almost exclusively for injection molding of rigid, tough parts requiring highest levels of clarity and surface gloss. Styrolux® 656C is sterilizable by gamma-rays and offers good hinge properties. Styrolux 684D 1500 59 4 26 MORE INFO > Styrolux® 684D is a clear styrene-butadiene copolymer (SBC) used in injection molding for parts with enhanced toughness as well as in sheet and film extrusion and blow molding.Parts made of Styrolux® 684D reveal excellent printability. Styrolux 693D 48 5 22 MORE INFO > Styrolux® 693D is a clear styrene-butadiene copolymer (SBC) with a well balanced combination of toughness and clarity. Styrolux 693D is mainly used for thermoformed articles, especially in blends with general-purpose polystyrene. Styrolux® 693D contains a microcrystalline wax which acts as an antiblock providing processing benefits but decreases the printability. Styrolux BATCH ASE MORE INFO > Highly effective lubricants in Styrolux® Batch ASE improve the release properties of injection molded parts made from Styrolux® or Styrolux® containing blends (e.g. those with GPPS).Styrolux® Batch ASE further improves the unstacking performance of deep-drawn parts and reduces the mar sensitivity of Styrolux®. The dosing of Styrolux® Batch ASE should not exceed 4 %; in most cases 2 % is already quite sufficient to form a lubricating layer. Styrolux® Batch ASE is based on Styrolux 684D carrier. Styrolux BATCH NB10 MORE INFO > Styrolux® Batch NB 10 contains an extremely active wax system which should be added in an amount of 0.5 % to 2 % if sheet or film blocking issues are encountered with Styrolux or Styrolux/GPPS blends. If the quantity added is too high, difficulties may occur during printing. Styrolux® Batch NB 10 is based on a GPPS-carrier. -
MaterialSMMA & MBSBrandClearblend®BusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Clearblend 145 2240 28 MORE INFO > Clearblend® 145 is an impact modified styrene acrylic copolymer blend with excellent clarity. Clearblend 165 1520 21 MORE INFO > Clearblend® 165 is an impact modified styrene acrylic copolymer blend with excellent clarity and outstanding toughness. -
MaterialSMMA & MBSBrandNAS®BusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS NAS 21 3300 98 24 1.5 60 MORE INFO > NAS® 21 is a styrene acrylic copolymer that can be used in a variety of applications demanding a strong, stiff water-clear plastic resin with excellent thermal stability. NAS 30 3300 98 30 1.5 60 MORE INFO > NAS® 30 is a styrene acrylic copolymer that can be used in a variety of applications demanding a strong, stiff water-clear plastic resin with excellent thermal stability. NAS 90 3100 90 16 1.5 60 MORE INFO > NAS® 90 is a styrene acrylic copolymer that can be used in a variety of applications demanding a strong, stiff water-clear plastic resin with excellent thermal stability. NAS XC UV 3400 98 24.4 1.4 MORE INFO > NAS XC is a styrene methyl methacrylate copolymer that can be used in a variety of applications demanding a extremely low haze and ultra clarity, also available with an UV package. -
MaterialSMMA & MBSBrandZylar®BusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Zylar 245 2300 78 48 2 37 MORE INFO > Zylar® 245 is a MBS grade that provides practical toughness, good clarity and superior processing characteristics for demanding injection molding applications. Zylar 550 2100 73 55 4 28 MORE INFO > Zylar® 550 is an impact modified styrene acrylic copolymer that provides practical toughness, good clarity and superior processing characteristics for demanding injection molded applications. Zylar 631 2000 77 55 4 36 MORE INFO > Zylar® 631 is an impact modified styrene acrylic copolymer that provides a balance of clarity and toughness, with outstanding strength and rigidity. Zylar 631 also has superior processing characteristics for demanding injection molded application. Zylar 650 2100 72 45 2 26 MORE INFO > Zylar® 650 is an impact modified styrene acrylic copolymer that provides a balance of clarity and toughness, with outstanding strength and rigidity. Zylar® 650 also has superior processing characteristics for demanding injection molded applications. Zylar 960 1640 60 65 16 28 MORE INFO > Zylar® 960 is an impact modified styrene acrylic copolymer that provides toughness equivalent to some grades of polycarbonate, good clarity and superior processing characteristics for demanding injection molded applications. -
MaterialStyrene MonomerBrandPolyethylbenzeneBusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Styrene By Products MORE INFO > -
MaterialStyrene MonomerBrandStyrene MonomerBusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Styrene Monomer MORE INFO > Styrene monomer is a basic building block for the production of dispersions, foams and polymers and is the backbone of the INEOS Styrolution portfolio of styrenic polymers. It is used in diverse applications ranging from food containers and packaging materials to cars, boats, computers, and appliances. -
MaterialStyrolution ECOBrandTerluran® ECOBusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Terluran ECO GP-22 MR50 2000 90 22 22 35 MORE INFO > Terluran® ECO GP-22 MR50 is a mechanical post consumer recycling (PCR) grade, with a PCR content of 50% in a standard black or dark grey color. It combines easy-flow, high impact resistance and heat distortion with high quality surface finish; intended for a wide range of applications and visible parts. Terluran ECO GP-22 MR70 2000 90 24 18 36 MORE INFO > Terluran® ECO GP-22 MR70 is a mechanical post consumer recycling (PCR) grade, with a PCR content of 70% in a standard black or dark grey color. It combines easy-flow, high impact resistance and heat distortion with high quality surface finish; intended for a wide range of applications and visible parts. -
MaterialStyrolution PSBrandGPPSBusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Styrolution PS 1200/1201 MORE INFO > Styrolution PS 124N/L 3200 87 50 MORE INFO > Styrolution PS 124N/L is a general purpose polystyrene grade with a good flow characteristic and an improved heat resistance. Styrolution PS 1290/1291 MORE INFO > Styrolution PS 1300/1301 MORE INFO > Styrolution PS 158N/L 3300 101 55 MORE INFO > Styrolution PS 158N/L is a heat resistant, rapid freezing general purpose grade. It is suitable for expanded sheet and film; for blends with high impact polystyrene in heat contact applications; for transparent, impact resistant applications in blends with Styrolux. Styrolution PS 1611 MORE INFO > Styrolution PS 1621 MORE INFO > Styrolution PS 165N/L 3300 89 52 MORE INFO > Styrolution PS 165N/L is a high molecular weight, good flowing grade, often blended with high impact extrusion grades. Styrolution PS 168N/L 3300 101 59 MORE INFO > Styrolution PS 168N/L is a high molecular weight, heat resistant grade with high mechanical strength. It is suitable for physically or chemically expanded extruded sheet. It is also suitable for use as blend component with high impact polystyrene or Styrolux. Styrolution PS 1700 MORE INFO > Styrolution PS 2600/2601 MORE INFO > Styrolution PS 2610 MORE INFO > Styrolution PS 3100/3101 MORE INFO > Styrolution PS 3190/3191 MORE INFO > Styrolution PS 3600/3601 MORE INFO > -
MaterialStyrolution PSBrandHIPSBusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Styrolution PS 454N 2200 82 16 27 MORE INFO > Styrolution PS 454N is an impact resistant polystyrene with a good balance of toughness, high flow, heat resistance and high gloss. Styrolution PS 495N 2000 89 17 26 MORE INFO > Styrolution PS 495N is an impact resistant polystyrene with a good balance of toughness, high flow, heat resistance and high gloss. Styrolution PS 5300 MORE INFO > Styrolution PS 5310 MORE INFO > Styrolution PS 5400/5401 MORE INFO > Styrolution PS 5410 MORE INFO > Styrolution PS 5600/5601 MORE INFO > Styrolution PS 5801 MORE INFO > Styrolution PS 6210/6211 MORE INFO > Styrolution PS 6220 MORE INFO > High Impact polystyrene 6220/6221 is a tough, high gloss product Styrolution PS 6230/6231 MORE INFO > High Impact polystyrene 6230/6231 is a tough, high gloss product. Styrolution PS 7120 MORE INFO > Styrolution PS 7800 MORE INFO >